119. “Effects of Reversing the Coiling Direction on the Force-Deflection Characteristics of Nickel-Titanium Closed-Coil Spring”
Hwan-Hyung Park, Suk-Hwan Jung, Juil Yoon, Kwang Koo Jee, Jun Hyun Han, Seung-Hak Baek,
Korean Journal of Orthodontics Vol. 49 (2019) p. 214-221.

‌118. “Thermo-elastic strain analysis in crystallographic-texture-aligned Fe–Pd magnetic shape memory alloy”
Jun Hyun Han, Taeyang Han, Youhan Sohn, Dong-Ik Kim, Hye Sung Kim, Sungho Jin,
Scripta Materialia Vol. 167 (2019) p. 56-60.

117. “The effect of the shape and alignment of reinforcing grahite phases on the thermal conductivity and coefficient of thermal expansion of graphite/copper composites”
Youhan Sohn, Taeyang Han, Jun Hyun Han,
Carbon Vol. 149 (2019) p. 152-164.

116. “Reduction of magnetic resonance image artifacts of NiTi implant by carbon coating”
Taeyang Han, Youhan Sohn, Sang Jin Park, Yu-Chan Kim, Kang Sik Lee, Soon-Gil Yoon, Dojin Kim, and Jun Hyun Han,
Materials Science & Engineering C Vol. 98 (2019) p. 1-8.

115. “Optimization for high speed manufacturing of Ti-6Al-4V alloy by a selective laser melting technique”
Kang Pyo Lee, Kang Min Kim, Suk Hyun Kang, Jun Hyun Han, Kyung Hwan Jung
Journal of the Korean Crystal Growth and Crystal Technology Vol. 28, No. 5 (2018) p. 217-221.

114. “Reduction of SnO2 by a Mixed Gas of Methane and Hydrogen”
Taeyang Han, Youhan Sohn, Sangyeol Kim, Hyun-Chul Jung, Hyun You Kim, San-ro Lee, Jun Hyun Han
Korean Journal of Materials Research Vol. 28, No. 12 (2018) p. 725-731.

113. “Effects of Graphite Shape and Composite Fabricating Method on Mechanical Properties of Graphite/Copper Composites”
Youhan Sohn, Jun Hyun Han
Korean Journal of Materials Research, Vol. 28, No. 10 (2018) p. 601-609.

112. “Effects of heat treatment temperature and cooling method on microstructure and hardness of Cu-22Sn alloy”
Museob Jeong, Ari Shin, Jun Hyun Han
J. of the Korean Society for Heat Treatment Vol. 31, No. 3 (2018) p. 104-110.

111. “Modification of the amount of CH4 supplied for the efficient CH4 reduction of SnO2”
Taeyang Han, Youhan Sohn, Hyunwoo Ha, Mi Yoo, Sangyeol Kim, Sang-ro Lee, Hyun You Kim, Jun Hyun Han
Korean Journal of Metals & Materials Vol. 56, No. 5 (2018) p. 384-391.

110. “Microstructure evaluation and electrochemical properties of HRDSR AZ61-X (X = Ca, Ti) alloys”
Min Gyu Kim, Woo Jin Kim, Gyeung-ho Kim, Kwon-Koo Cho Jun Hyun Han, Hye Sung Kim
J. of Nanoscience and Nanotechnology Vol. 18, No. 9 (2018) p. 6081-6089.

109. “Effects of post-annealing and strong deformation process on the mechanical and corrosion properties of a Mg-Mn alloy for biomedical application”
Min Gyu Kim, Jin Kon Kim, Hye Sung Kim, Woo Jin Kim, Jun Hyun Han
J. of the Korean Physical Society Vol. 72, No. 6 (2018) p. 692-698.

108. “Highly Adhesive and High Fatigue-Resistant Copper/PET Flexible Electronic Substrates”
Sang Jin Park, Tae-Jun Ko, Juil Yoon, Myoung-Woon Moon, Kyu Hwan Oh, Jun Hyun Han
Applied Surface Science Vol. 427 (2018) p. 1-9.

107. “Study on microstructure and thermal properties of a CNF/Cu nanocomposite fabricated using electroless plating”,
Ari Shin ,Yong-In Kim, Se-Hyun Ko, Jun Hyun Han
J. of Alloys & Compounds Vol. 737 (2018) p.21-30.

106. “Reduction of SnO2  by CH4 for Efficient Sn Recovery”
Hyunwoo Ha, Mi Yoo, Hyesung An, Kihyun Shin, Taeyang Han,Youhan Sohn, Sangyeol  Kim, Sang-Ro Lee, Jun Hyun Han, Hyun You Kim
Scientific Reports Vol. 7 (2017) p. 14427.

105. “Effect of Plating Conditions on Electroless Copper Plating on SiC Fabric”,
Kee Hwan Lee, Youhan Sohn, Taeyang Han, Kyung Jin Lee, Hye Sung Kim, Jun Hyun Han
J. of Korean Inst. Surf. Eng. Vol. 50, No. 4 (2017) p. 244-250.

104. “Direct patterning of Cu circuit on polymer using selective surface modification and electroless plating without pretreatments”
Sang Jin Park, Tae-Jun Ko, Juil Yoon, Myoung-Woon Moon, Kyu Hwan Oh, and Jun Hyun Han
Applied Surface Science, Vol. 396 (2017) p. 1678-1684

103. “Ultra-thin metal films with defined topographical structures as in vitro cell culture platforms for unveiling vascular cell behaviors”
Indong Jun, Yong-Woo Chung, Jimin Park, Hyung-Seop Han, Jaeho Park, Saeromi Kim, Hyungjung Lee, Sang Hoon Kim, Jun-Hyun Han, Hyunjung Kim, Hyun-Kwang Seok, Yu-Chan Kim, Hojeong Jeon
Advanced Healthcare Materials, Vol. 5 No. 18 (2016) p. 2396-2405.

102. “Effects of Acid Treatment of Carbon on Electroless Copper Plating”
Ari Shin, Jun Hyun Han
J. of Korean Inst. Surf. Eng., Vol. 49, No. 3 (2016) p. 265-273.

101. “Effects of plating conditions on thickness and surface roughness of electroless plated Cu layer”
Kee Hwan Lee, Sang Jin Park, Jun Hyun Han
Korean Journal of Metals & Materials, Vol. 54, No. 4 (2016) p. 237-245.

100. “Multi-Wall Carbon Nanotubes-Embedded Lithium Cobalt Phosphate Composites with Reduced Resistance for High Voltage Lithium-Ion Batteries”
Tae Kyoung Kim, Cyrus S Rustomji, Hyung-Man Cho, Dongwon Chun, Duyoung Choi, Elizabeth Caldwell, Youngjin Kim, Jun Hyun Han, Sungho Jin
Electronic Materials Letters, Vol. 12, No.1 (2016) p. 147-155.

99. “Synthesis and consolidation behavior of Al/AlN composite powders by reactive RF thermal plasma spraying”
Sung Chul Cho, Chulwoong Han, Hanshin Choi, Hae Sung Kim, Sungho Jin, Jun Hyun Han
Powder Technology, Vol. 287 (2016) p. 395-402.

98. “Carbon fiber/Aluminum composites fabrication using wettability control”
Yongbeom Lee, Sangjin Park, Jun Hyun Han
Composites Research, Vol. 28, No. 5 (2015) p. 254-259.

97. “Etchless Cu Circuit Fabrication Using Wettability Difference and Electroless Plating”
Sang-Jin Park, Tae-Jun Ko, Juil Yoon, Myoung-Woon Moon, Jun Hyun Han
Korean Journal of Materials Research, Vol. 25, No. 11 (2015) p. 622-629.

96. “Fabrication of AlN/Cu Composites Using Electroless Plating and Evaluation of Thermal Properties as AlN Particle Size”
Sung Chul Cho, Se-Hyun Ko, Hye Sung Kim, Jae-Pyung Ahn, Jun Hyun Han
Korean Journal of Metals & Materials, Vol. 53, No. 12 (2015) p. 911-918.

95. “Texture and magnetic properties of Fe thin films fabricated by field-sputtering vs field-annealing”
Sang Jin Park, Chin-Hung Liu, Hae Sung Kim, No Jin Park, Sungho Jin, Jun Hyun Han
Thin Solid Films, Vol. 594 (2015) p. 178-183.

94. “Microstructure and Properties of Silicon-Incorporated DLC Film Fabricated Using HMDS Gas and RF-PECVD Process”
Byung Ju Song, Woo Jin Song, Jun Hyun Han, Ka Ram Kim, Su Jong Yoon, Tae Gyu Kim, Jin kon Kim, Hyun Cho, Gyeung-Ho Kim, Dae Youn Hwang, and Hye Sung Kim
J. Nanoscience & Nanotechnology, Vol.14 (2014) p.9124-9130

93. “Corrosion Behavior of Magnesium Powder Fabricated by High-Energy Ball Milling and Spark Plasma Sintering”
Ka Ram Kim, Jin Woo Ahn, Gyeung-Ho Kim, Jun Hyun Han, Kwon Koo Cho, Jae-Seung Roh, Woo Jin Kim, and Hye Sung Kim
Metals and Materials International, Vol. 20 (2014) p.1095-1101

92. “Dynamic recrystallization in high-purity aluminum single crystal under frictionless deformation mode at room temperature”
Yong Seok Choi, Kyung Il Kim and Kyu Hwan Oh, Heung Nam Han, Suk Hoon Kang, Jinsung Jang, Jun Hyun Han
J. of Materials Research, Vol.28 No.20 (2013) p.2829-2834.

91. “Thermoelastic strain in polycrystalline Fe-Pd shape memory alloy thin film”
Jun Hyun Han, Juil Yoon, Kwang Koo Jee, Joost J. Vlassak
Thin Solid Films. Vol.546 (2013) p.196-199.

90. “Effects of Cu interlayer on the wettability of aluminum on carbon”
Young Jin Ko, Juil Yoon, Joonho Lee, Jun Hyun Han
J. of Alloys & Compounds, Vol.574 (2013) p.526-531. 

89. “Effect of change in coil orientation for SMA spring”
K.E. Kim, J.H. Han, Y.M. Sung, K.K. Jee, W.Y. Jang
J. of Alloys & Compounds. Vol.577S (2013) p.S741-S744.

88. “Tb0.3Dy0.7Fe1.9/PbZr0.52Ti0.48O3 micro-bridge on SiNx thin film for low frequency magnetic sensing applications”
Dong Gun Lee, Jun Hyun Han, Junwoo Lee, Wook Choi, Yong Kyung Yoo, Jinseok Kim, Kyo Seon Hwang, Tae Song Kim, Dong Won Chun, Yu-Chan Kim, Kyu Hyung Lee, and Jeong Hoon Lee
Japanese Journal of Applied Physics, Vol.52 (2013) p.10MC10-1~ 10MC10-4.

87. “Improvement of actuating properties of a SMA coil spring by change in coil orientation”
K. K. Jee, J. H. Han, W. Y. Jang
Materials Science Forum, Vols. 738-739 (2013) p.589-594

86. “Ultra-sensitive magnetoelectric microcantilever at a low frequency”
Dong Gun Lee, Sung Man Kim, Yong Kyung Yoo, Jun Hyun Han, Dong Won Chun, Yu-Chan Kim, Jinseok Kim, Kyo Seon Hwang, Tae Song Kim, Won Woo Jo, Hyungsuk Kim, Seung-Ho Song and Jeong Hoon Lee
Applied Physics Letters, Vol. 101 (2012) p.182902-1∼4.

85. “Effects of CNF dispersion on mechanical properties of CNF reinforced A7xxx nanocomposites”
Jun-Young Lim, Se-Il Oh, Yu-Chan Kim, Kwang-Koo Jee, Yun-Mo Sung, Jun Hyun Han
Mater. Sci. & Eng. A, Vol.556 (2012) p.337-342

84. “Fabrication of carbon nanofiber reinforced aluminum alloy nanocomposites by a liquid process”
Se-Il Oh, Jun-Young Lim, Yu-Chan Kim, Juil Yoon, Gyeung-Ho Kim, Joonho Lee, Yun-Mo Sung, Jun-Hyun Han
J. of Alloys & Compounds, Vol.542 (2012) p.111-117

83. “Magnetic anisotropy and morphology of Fe epitaxial layers grown on MgO/InAs heterostructures”
Kyung-Ho Kim, Hyung-jun Kim, Jae-Pyung Ahn, Jun-Hyun Han, Jun Woo Choi, and Joonyeon Chang
J. of Nanoscience and Nanotechnology (JNN), Vol.12, No.2 (2012) p.1573-1576

82. “Microstructural Changes of Epitaxial Fe/MgO layers grown on InAs(001) substrates”
Kyung-Ho Kim, Hyung-jun Kim, Jae-Pyoung Ahn, Jun Woo Choi, Jun-Hyun Han, Rizcy Tamarany, Seung-Cheol Lee, Joonyeon Chang, Young Keun Kim
Crystal Growth & Design, Vol.11 (2011) p.2889-2896

81. “Effects of external magnetic field on magnetic properties of sputtered magnetic thin film”
 Hyun Tae Ahn, Sang Ho Lim, Kwang Koo Jee, Jun Hyun Han
J. of Korea Inst. of Met. & Mater. Vol. 49, No. 6 (2011) p.501-513.

80. “Asymmetric rolling of twin-roll cast Al alloy sheet: Mechanical properties and formability”,
Boo-Hyeon Cheon, Jun-Hyun Han, Hyoung-Wook Kim, Jae-Chul Lee
   J. of Korea Inst. of Met. & Mater. Vol. 49, No. 3 (2011) p.243-249.

79. “Effects of aging on microstructure and strengthening in 7050 Al alloy sheet processed by equal channel angular rolling (ECAR)”
Jun-Hyun Han
Materials Transactions, (2010) Vol.51, No.11 (2010) p.2109-2112

78. “New SMA Actuator with High Energy Efficiency and Quick Response”
Kwang Koo Jee, Jun Hyun Han, J.M. Park, Woo Yang Jang
Materials Science Forum, Vol.654-656 (2010) p.2111-2113.

77. “Shape Memory Effect in Fe-Pd Magnetic Shape Memory Alloy Thin Films”
Jun Hyun Han, Hyun Tae Ahn, Tae Hyun Kim, Kwang Koo Jee
Materials Science Forum, Vol.654-656 (2010) p.2107-2110.

76. “Characterization on Titanium Surfaces and its effect of Photocatalytic Bactericidal Activity”
H. C. JOO, Y. J. Lim, M. J. Kim, H. B. Kwon, J. H. Han
Applied Surface Science, Vol.257 (2010) p.741-746.

75. “High-Frequency Magnetic Properties of Soft Magnetic Cores Based on Nanocrystalline Alloy Powder Prepared by Thermal Oxidation”
T. H. Kim, K. K. Jee, D. J. Byun, Yoon B. Kim, J. H. Han
J. of Magnetism and Magnetic Materials (JMMM), Vol. 322 (2010) p.2423-2427.

74. “A study on powder mixing for high fracture toughness and wear resistance of WC-Co-Cr coatings sprayed by HVOF”
C. W. Lee, J. H. Han*, J. Yoon, M. C. Shin, S. I. Kwun
Surface & Coatings Technology, Vol. 204 (2010) p. 2223-2229.

73. “Wrinkle-based measurement of elastic modulus of Pt nano-scale thin film deposited on polymeric substrate: verification and uncertainty analysis”
Hyun-Ju Choi, Jae-Hyun Kim, Hee-Jung Lee, Sun-Ah Song, Hak-JooLee, Jun-Hyun Han, Myung-Woon Moon
Experimental Mechanics, Vol. 50, No.5 (2010) p.635-641.

72. “Microstructure and mechanical properties of twin-rolled strip-cast Al-5.5Mg-0.02Ti ally sheet”
Boo-Hyoen Cheon, Jun-Hyun Han, Hyoung-Wook Kim, Jae-Chul Lee
J. of Korea Inst. of Met. & Mater. Vol. 48, No. 5 (2010) p.387-393.

71. “A Measurement of Elastic Moduli for Tungsten Films on Polymer Substrate Using Wrinkling Analysis”,
Myoung-Woon Moon, Jun Hyun Han
Applied Surface Science, Vol. 256 (2009) p. 593-596.

70.  “Nanoscale ripples on polymers created by focused ion beam”
Myoung-Woon Moon, Jun Hyun Han, Ashkan Vaziri, Eun Kyu Her, Kyu Hwan Oh, Kwang-Ryeol Lee, and John W. Hutchinson
Nanotechnology. Vol.20 (2009) p.115301.

69. “Effects of die geometry on variation of the deformation rate in equal channel angular pressing”
Jun-Hyun Han, Hyung-Joon Chang, Kwang-Koo, Kyu Hwan Oh
Metals and Materials International, Vol.15 (2009) p.439-445.

68. “Fe-Based Nano-Structured Powder Reinforced Zr-Based Bulk Metallic Glass Composites by Powder Consolidation”
Seung Mok Cho, Jun Hyun Han, Jin Kyu Lee, Yu Chan Kim
Kor. J. Mater. Res., Vol. 19, No.9 (2009) p.504-509.

67. “Effects of powder mixing on the mechanical properties of thermally sprayed WC-Co-Cr coating layers”
Chang Woo Lee, Jun Hyun Han*, Myung Chul Shin, S. I. Kwun
J. of Korea Inst. of Met. & Mater. Vol. 47 (2009) p. 290-296.

66. “Effects of surfactant and preplate process on electroless copper plating on carbon nano-fiber”
Jun Hyun Han*, Hyun Kwang Seok, Sang Soo Lee, Kwang Koo Jee
J. of Korean Powder Metallurgy Institute, Vol. 16, No.2 (2009) p. 131-137.

65. “New method for improving properties of SMA coil springs”,
K. K. Jee, J. H. Han, Y. B. Kim, D. H. Lee, W. Y. Jang
European Physical Journal Special Topics, Vol. 158, (2008) p. 261-266.

64. “High-throughput analysis of thin-film stresses using arrays of micromachined cantilever beams”
Hyun-Jong Kim, Jun-Hyun Han, Roy Kaiser, Kyu Hwan Oh, Joost J. Vlassak
Review of Scientific Instruments, Vol.79 (2008) p.045112-1~045112-7.

63. “Evaluation of formability and planar anisotropy based on textures in aluminum alloys processed by a shear deforming process”
Jun-Hyun Han, Jin-Yoo Suh, Kwang-Koo Jee, Jae-Chul Lee
Mater. Sci. & Eng. A, Vol.477 (2008) p.107-120.

62. “Soft magnetic properties of patterned Co-based amorphous wires with various dimensions”,
Chang Bean Park, Do Hun Kim, Dong Won Chun, Jun Hyun Han, Heon Jin Choi, Won Young Jeung
Physica Status Solidi C, Vol.4, No.12 (2007), p. 4581-4584

61. “Giant magnetoimpedence effects in micro-patterned Co52Fe32B11Si5 amorphous ribbons”
Sun Hee Park, Dong Won Chun, Jun Hyun Han, Young-Ho Kim and Won Young Jeung
Physica Status Solidi A, Vol.204, No.12 (2007) p.4071-4074

60. “Effects of external magnetic field on magnetic properties and surface morphology of electrodeposited CoFeNi alloys”
Hyun Kyung Kim, Dong Won Chun, Jun Hyun Han, Kwang Bum Kim and Won Young Jeung
Physica Status Solidi A, Vol. 204, No.12 (2007), p. 4104-4107

59. “Formation of nitride film on amorphous ribbon using chemical vapor deposition”,
Jun-Hyun Han, Tae-Hoon Kim Jin-Kook Yoon, Kwang-Koo Jee, Kwang-Yoon Kim
Mater. Sci. & Eng. A, Vol. 449-451 (2007) p.741-746

58. “Adhesion Properties of Copper/Polyimide Film Modified by Reactive Ion Etching (RIE)”,
W. J. Lee, Yoon B. Kim, W.Y. Lee, S. H. Han, J. H. Han, K. K. Jee
Solid State Phenomena Vol.124-126, (2007) p.1593-1596

57. “Suggestion of Pipe Coupling Method for Maximum and Uniform Joining Stress”
K. K. Jee, J. H. Han, W. S. Jung and W. Y. Jang
 Materials Transactions Vol.47, No.3, (2006) p.750-752

56. “A method of pipe joining using shape memory alloys”
K. K. Jee, J. H. Han, W. Y. Jang
Mater. Sci. & Eng. A, Vol. 438-440 (2006) p.1110-1112

55. “Effect of grain size on amount of deformation-induced e-martensite and shape memory effect in Fe-Mn alloy”
K. K. Jee, J. H. Han, Y. B. Kim, W. Y. Jang
 International Journal of Applied Electromagnetics and Mechanics Vol. 23, (2006) p.59-64

54. “Effect of electromagnetic stirring on orientation distribution function of primary solid phase of Al-Cu alloy”
Dock-Young Lee, Jun-Hyun Han, Suk-Won Kang, Jung-Hwa Mun, Ki-Bae Kim
Materials Science Forum Vols. 510-511 (2006) pp. 526-529.

53. “Microstructure and magnetoresistance of sputtered Bismuth thin Films upon annealing”
Joonyeon Chang, Jun Hyun Han, H. J. Kim, M. H. Jeon, W. Y. Lee
Journal of Applied Physics Vol. 98, No. 2, (2005) p. 023906

52. “Low-temperature cyclic oxidation behavior of MoSi2/Si3N4 nanocomposite coating formed on Mo substrate at 773K”,
Jin-Kook Yoon, Kyung-Hwan Lee, Jun-Hyun Han, Gyeung-Ho Kim, Jung-Mann Doh, Kyung-Tae Hong
Surface Coatings & Technology Vol.200, No.7 (2005) p.2537-2546

51. Jun-Hyun Han, Jin-Kook Yoon, Jong-Woo Park, Kyu Hwan Oh, Jae-Chul Lee
“A Comparative Study of Two Shear Deforming Processes in Texture Evolution” Materials Transactions Vol.46, No.5 (2005) p.1064-1069

50. “Microstructure and oxidation property of NbSi2/Si3N4 nanocomposite coating formed on Nb substrate by nitridation process followed by pack siliconizing process”
Jin-Kook Yoon, Kyung-Hwan Lee, Jun-Hyun Han, In-Jin Son, Jung-Mann Doh, and Gyeung-Ho Kim
Intermetallics, Vol.13, No.11 (2005) p.1146-1156
 
49. “Microstructure of NbSi2/SiC nanocomposite coating formed on Nb substrate”
Keun-Hyung Son, Jin-Kook Yoon, Jun-Hyun Han, Gyeung-Ho Kim, Jung-Mann Doh, Seong-Rae Lee
J. of Alloys and Compounds, Vol. 395 (2005) p. 185-191.

48. “Microstructure of MoSi2-base nanocomposite coatings formed on Mo substrates by chemical vapor deposition”
Jin-Kook Yoon, Keun-Hyung Son, Jun-Hyun Han, Gyeung-Ho Kim, Jung-Mann Doh, Kyung-Tae Hong
Zeitschrift fur Metallkunde, Vol. 96, No. 3 (2005) p. 281-290.

47. “Controlling the textures of the Al alloy sheet via dissimilar channel angular pressing”
Jun Hyun Han, M. Y. Huh, Jin Yoo Suh, and Jae Chul Lee
Mater. Sci. & Eng. A. Vol 394 (2005) p. 60-65

46. “Effect of Heat Treatment Temperature on Amount of Stress-Induced e Martensite in an Fe-Mn Based Alloy”
K.K. Jee, J. H. Han, W.Y. Jang
J. of the Korean Society for Heat Treatment, Vol. 17, No. 6 (2004) p.342-345.

45. “Effects of the initial textures and the deformation history on the texture evolution in the Al alloy during the shear deforming process”
Jun-Hyun Han, Jin-Yoo Suh, Kyu Hwan Oh, Jae-Chul Lee
Acta Materialia, Vol.52, No.16 (2004) p.4907-4918.

44. “Orientation Rotation Behaviors in Aluminum Alloys during Dissimilar Channel Angular Pressing”
Jun-Hyun Han, Jin-Yoo Suh, Kyu Hwan Oh, Jae-Chul Lee
Materials Transactions, Vol.45, No.1 (2004) p.125-130.

43. “In-situ Orientation Rotation Behavior Study during Tensile Deformation of Aluminum Single Crystal and Polycrystal”
Jun-Hyun Han, Dong-Ik Kim, Kwang-Koo Jee, Kyu Hwan Oh
Materials Science Forum, Vol. 449-452, (2004) p.593-596

42. “Measurement of volume fraction of ε martensite in Fe-Mn based alloy”
K. K. Jee, J. H. Han and W. Y. Jang
Mater. Sci. & Eng. A, Vol. A378 (2004) p. 319-322

41. “Characteristic of textures evolution induced by equal channel angular pressing in 6061 aluminum sheets”
Qin Jining, Jun-Hyun Han, Zhang Guoding, Jae-Chul Lee
Scripta Materialia, Vol. 51 (2004) p. 185-189

40. “Low-Temperature Cyclic Oxidation Behavior of MoSi2/SiC Nanocomposite Coating Formed on Mo Substrate”
Jin-Kook Yoon, Kyung-Hwan Lee, Jun-Hyun Han, Gyeung-Ho Kim, Jung-Mann Doh, Kyung-Tae Hong
Materials Transactions, Vol.45 No.7 (2004) p. 2435-2442

39. “Effect of Accumulative Strain on the Texture Evolution in 1050 Al alloys Processed by Continuous Confined Strip Shearing”
Jun-Hyun Han, Kyu-Hwan Oh, Jae-Chul Lee
Mater. Sci. & Eng. A, Vol. 387-389 (2004) p. 240-243.

38. “Evolution of crystallographic orientations in aluminum single crystal during tensile deformation”
Jun-Hyun Han, Dong-Ik Kim, Kwang-Koo Jee, Kyu-Hwam Oh
Mater. Sci. & Eng. A. Vol. 387-389 (2004) p. 60-63.

37. “Texture evolution and plastic strain ratio in 5083 aluminum alloys processed by cold forging”
Jun-Hyun Han, Kwang-Koo Jee, Kyu Hwan Oh
J. of Korea Inst. of Met. & Mater. Vol.42, No.6 (2004) p. 530-535.

36. “Effect of Post-Annealing on Microstructure and Magnetoresistance of Sputtered Semimetal Bi Thin Film”,
M.H. Jeun, J.Y. Chang, S.H. Han, J. H. Han, W.Y. Lee
J. of Korea Inst. of Met. & Mater. Vol.42, No.7 (2004) p. 611-615.

35. “Effect of Initial Texture on Texture Evolution in 1050 Al Alloys under Simple Shear”
Jun-Hyun Han, Kyu Hwan Oh, Jae-Chul Lee
Metallurgical and Materials Transactions A, Vol. 34A (2003) p. 1675-1681.
 
34. “Orientation rotation behavior during in-situ tensile deformation of polycrystalline aluminum alloys”
Jun-Hyun Han, Kwang-Koo Jee, Kyu Hwan Oh
Int. J. of Mechanical Science, Vol.45 (2003) p. 1613-1623.
 
33. “Effect of deformation histories on texture evolution during equal- and dissimilar channel angular pressing”
Jin-Yoo Suh, Jun-Hyun Han, Kyu-Hwan Oh, Jae-Chul Lee
Scripta Mater. Vol. 49 (2003) p. 185-190.
 
32. “Effect of precipitates on microstructural evolution of 7050 Al alloy sheet during equal channel angular rolling”
C.Y. Nam, J.H. Han, Y.H. Chung, M.C. Shin
Materials Science & Eng. A, Vol. A347 (2003) p. 253-257.
 
31. “The Effect of Interlayer Thickness on Shear Deformation Behavior of AA5083 Aluminum Alloy/SS41 Steel Plates Manufactured by Explosive Welding”
Jun Hyun Han, Jae Pyoung Ahn, Myung Chul Shin
J. of Materials Science Vol. 38 (2003) p. 13-18.

30. “In Situ Deformation Behavior Study during Uniaxial Tension of Aluminum Alloys Using a High Resolution EBSD”
Jun-Hyun Han, Kyu Hwan Oh, Young Hoon Chung
Key Engineering Materials Vols. 233-236 (2003) p. 835-840.
29. “Measurement of Volume Fraction of e Martensite using Specific Volume Difference in Fe-Mn Based Alloys”
K.K. Jee, J. H. Han, W.Y. Jang
J. of the Korean Society for Heat Treatment, Vol. 16, No. 4 (2003) p.211-215.
28. “Shear Deformation Behavior of AA5083/AA1050/SS41 Plates Manufactured by Explosive Welding”
Jun Hyun Han, Jae Pyung Ahn, Kyu Hwan Oh, Myung Chul Shin
J. of Korea Inst. of Met. & Mater. Vol. 41, No.4, (2003) p.244-249.
 
27. “Texture Evolutions of 5052 Aluminum Alloy Sheets Processed by Dissimilar Channel Angular Pressing”
Jun Hyun Han, Kyu Hwan Oh, Kwang Koo Jee, Young Hoon Chung, Myung Chul Shin
Materials Science Forum Vol. 408-412 (2002) p. 679-684.
 
26. “Orientation Correction Method of Distorted Samples During In-situ Deformations Using High Resolution EBSD”
Jun Hyun Han, Suk Min Baeck, Kyu Hwan Oh, Young Hoon Chung
Materials Science Forum Vol. 408-412 (2002) p. 203-208.

25. “In Situ Deformation Behavior of Retained Austenite in TRIP Steel”,
K.K. Park, S.T. Oh, S.M. Baeck, D.-I. Kim, J.H. Han, H.N. Han, S.-H. Park, C.G. Lee, S.-J. Kim, K.H. Oh
Materials Science Forum Vol. 408-412 (2002) p. 571-576.

24. “A Study of screw loosening with various implant fixture and abutment connection system”,
Tae-In Kim, Tae-Sik Song, Ki-Sung Kim, Jun-Hyun Han
J. of the Korean Academy of Implant Dentistry, Vol.21, No.1, (2002) p.21-33.

23. “Korean Implant Development and Clinical Application-Protect447 Implant R&D”
T.I. Kim, J.H. Han, K.H. Lee
Reality of Dental Implant, Vol.22, No.6, (2002) p.734-739.

22. “Effect of the Initial Texture on the Texture Evolution in 1050 Al Alloys fabricated by Continuous Confined Strip Shearing”
Jun Hyun Han, Kyu Hwan Oh, Myung Chul Shin, Jae Chul Lee
J. of Korea Inst. of Met. & Mater. Vol. 40, No.11, (2002) p. 1215-1222.

21. “Texture evolution of the strip cast 1050 Al alloy processed by continuous confined strip shearing and formability evaluation”
Jun-Hyun Han, Hyun-Kwang Seok, Young-Hoon Chung, Myung-Chul Shin, Jae-Chul Lee
Materials Science & Eng. Vol. A323 (2002) p. 342-347.
 
20. “Fabrication of AA6061/Al2O3 composites from element and alloy powders”,
K. B. Lee, H. S. Sim, Y. S. Kim, J. H. Han, H. Kwon
J. of Materials Science Vol.37 (2002) p. 1845-1854.
 
19. “Structural Evolution of a Strip-Cast Al Alloy Sheet Processed by Continuous Equal-Channel Angular Pressing”
Jae-Chul Lee, Hyun-Kwang Seok, Jin-Yoo Suh, Jun-Hyun Han, Young-Hoon Chung
Metallurgical and Materials Transactions A Vol.33A (2002) p. 665-673.

18. “Controlling the textures of the metal strips via the continuous confined strip shearing”
Jae-Chul Lee, Hyun-Kwang Seok, Jun-Hyun Han, Young Hoon Chung
Materials Research Bulletin Vol.36 (2001) p. 997-1004.

17. “A Study of Osseointegration on Protect-447 dental implant in rabbit bone”
Taein Kim, Jae-Il Lee, Jun-Hyun Han, Hyung Jin Kim
J. of the Korean Academy of Implant Dentistry, Vol.20, No.1, (2001) p. 39-47.

16. “Effect of Continuous Confined Strip Shearing on Texture of Strip Cast 1050 Al Alloy Sheet”
Jun Hyun Han, Kyu Hwan Oh, Hyun Kwand Seok, Young Hoon Chung
J. of Korea Inst. of Met. & Mater. Vol. 39, No.11, (2001) p.1330-1336.

15. “Grain Structure Analysis in Rolled 1050 Al Alloy Sheets Using EBSD”
J. H. Han, M. C. Shin
J. of Analytical Science & Technology, Vol.14, No.1, (2001) p.50-58.

14. “Effect of Grain Shape and Texture on the Earing in Al-Li Alloy”,
Y. H. Chung, K. K. Cho, J. H. Han, M. C. Shin
Scripta mater Vol. 43 (2000) p. 759-764.

13. “The Effect of Grain Structure on the Current-Density Exponent in the Black Equation for Al-Based Inetrconnects”
J. H. Han, M. C. Shin, and S. H. Kang
J. of the Korean Physical Society Vol.35 (1999) p. S256-S259.

12. “Effects of Precipitates Distribution on Electromigration in Al-Cu Thin-Film Interconnects”
J. H. Han, M. C. Shin, S. H. Kang, J. W. Morris, Jr
Applied Physics Letters, Vol.73, No.6, (1998) p. 762-764.

11. “A Histomorphometric Study of Bone Apposition to Newly Developed Ti Based Alloys in Rabbit Bone”
Taein Kim, Jun Hyun Han, Kyu Hwan Lee, Boo Byung Choi, Myung Chul Shin
Biomaterials Research Vol.2 No.4 (1998) p. 145-152.

10. “Development of Ti Metal Implant System and Manufacturing Technique in Korea (2)”
T. I. Kim, J. H. Han, I. S. Lee, W. S. Heu, K.H. Lee
The Journal of the Korean Dental Association, Vol.36, No.1, (1998) p.17-27.

9. “New titanium alloys for biomaterials: A study of mechanical and corrosion properties and cytotoxicity”,
Taein Kim, Jun-Hyun Han, In-Seok Lee, Kyu-Hwan Lee, Boo-Byung Choi, Myung Chul Shin
Bio-Medical Materials and Engineering Vol.7, No.4 (1997) p. 253-263.

8. “Development of Ti Metal Implant System and Manufacturing Technique in Korea”
T.I. Kim, J.H. Han, I.S. Lee, W.S. Heu, K.H. Lee
J. of the Korean Academy of Implant Dentistry, Vol.16, No.1, (1997) p.1-26.

7. “Development of Ti Metal Implant System and Manufacturing Technique in Korea (1)”
T.I. Kim, J.H. Han, K.H. Lee
The Journal of the Korean Dental Association, Vol.35, No.12, (1997) p.927-933.

6. “Effects of Post-Pattern Annealing on Electromigration in Al-2Cu Interconnects”
J. H. Han and M. C. Shin
J. of Korea Inst. of Met. & Mater. Vol.35, No.11 (1997) p. 1555-1560.

5. “A Study on Cytotoxicity of the New Titanium Alloys for Dental Implant Material”
T. I. Kim, J. H. Han, I. S. Lee, K. H. Lee, M. C. Shin, B. B. Choi
The Journal of Korean Academy of Prosthodontics, Vol.34, No.4, (1996) p. 675-686.

4. “Corrosion Characteristics of Titanium Alloys for Medical Implant”
J. H. Han, K. H. Lee, M. C. Shin
J. of Analytical Science & Technology, Vol.9, No.2, (1996) p. 192-197.

3. “A Study on Mechanical Properties and Cytotoxicity of the New Titanium Alloys for Implant Material”
T. I. Kim, J. H. Han, I. S. Lee, K. H. Lee, M. C. Shin, B. B. Choi
J. of the Korean Academy of Implant Dentistry, Vol.15, No.1, (1996) p. 1-18.

2. “Stress Localization and Stress Recovery in a Shape Memory Alloy”
K.K. Jee, J.H. Han, X.J. Mi, M.C. Shin
J. of Korea Inst. of Met. & Mater. Vol.34, No.1 (1996) p. 47-51.

1. “Effect of Precess Variables on Mechanical Properties of AC8A/SiCp Composites by Melt-Stirring Method"
J. H. Han, Y. H. Hong, J. H. Hong
J. of Korea Inst. of Met. & Mater. Vol.32, No.6 (1994) p. 734-741.