[2024]
149. “Effect of strain rate on hydrogen embrittlement of Ti6Al4V alloy”
Tien-Dung Nguyen, Nooruddin Ansari, Keun Hyung Lee, Dong Hyun Lee, Jun Hyun Han, and Soo Yeol Lee
Materials Vol. 17 (2024) p.1100
148. “In-situ neutron diffraction study of serration-involved ultra-cryogenic deformation behavior at 15 K”
You Sub Kim, Hobyung Chae, Dong-Hyun Lee, Jun Hyun Han, Soon-Ku Hong, Young Sang Na, Stefanus Harjo, Takuro Kawasaki, Wanchuck Woo, Soo Yeol Lee
Materials Science and Engineering A Vol. 899 (2024) p. 146453
147. “Mechanical properties of base metal and heat-affected zone in friction-stir-welded AA6061-T6 at ultra-low temperature”
Thanh-Dat Nguyen, Chetan Singh, You Sub Kim, Jun Hyun Han, Dong-Hyun Lee, Kwangjin Lee, Stefanus Harjo, Soo Yeol Lee
Journal of Materials Research & Technology (JMR&T) Vol. 31 (2024) p. 1547-1556
146. “Effects of pre-deformation mode on non-homogeneity of plastic deformation and mechanical properties in Al-Cu-Mg-Ag alloy”
Chan Uk Jeong, Jihun Choi, Hyeonil Park, Jun Hyun Han
Journal of Materials Research & Technology (JMR&T) Vol. 31 (2024) p. 2376-2387
145. “Effects of hot rolling process conditions on microstructure and mechanical properties of hot-rolled Al-Zn-Mg-Cu-Sc-Zr alloys”
Minkyung Jeong, Suyeon Jo, Dongil Lee, Seungwoo Yuk, Taeho Lee, Soo Yeol Lee, Su Hyeon Kim, Jun Hyun Han
Korean Journal of Metals & Materials Vol. 62, No. 8 (2024) p. 661-671
144. “Enhancing the fatigue resistance of high and medium entropy alloys by manufacturing-driven microstructural developments” You Sub Kim, Mao-Yuan Luo, Dunji Yu, Ke An, Yan Chen, In-Hwan Oh, Eunjoo Shin, Wanchuck Woo, Hobyung Chae, Young-Sang Na, Peter K. Liaw, Jun Hyun Han, E-Wen Huang, Soo Yeol Lee
Additive Manufacturing Vol. 91 (2024) p. 104332
143. “Facile synthesis of Ni-MgO/CNT nanocomposite for hydrogen evolution reaction”
P. Mohana, M. Isacfranklin, R. Yuvakkumar, G. Ravia, L. Kungumadevic, J. H. Han, S.I. Hong
Nanomaterials, Vol. 14 (2024) p. 280
[2023]
142. “Tailored Silver Nanowires for Amplified Lithium-Ion Battery Performance and Inhibition of Lithium Dendrites in Silicon–Graphite–Silver Nanowires Composite Electrodes”
Kyoung-Jin Jeong, Tae Jun Wang, Hayk Nersisyan, and Jun Hyun Han, Jong Hyeon Lee
ACS Applied Energy Materials, Vol. 6, No. 22 (2023) p. 11626-11641
141. “Effects of asymmetric rolling and aging sequence on microstructure and mechanical properties of Al-Zn-Mg-Cu aluminum alloys”
Minkyung Jeong, Jongbeom Lee, Su Hyeon Kim, and Jun Hyun Han
Journal of the Korean Society for Heat Treatment Vol. 36, No. 5 (2023) p. 285-297
140. “Bimodal reinforcement of graphite flakes and graphene nanoplatelets in copper matrix composites: Anisotropy of the thermomechanical properties and failure mechanisms”
Jun Zhang, Sang Hun Shim, Dong-gil Lee, Jun Hyun Han
Journal of Materials Research & Technology (JMR&T) Vol. 26 (2023) p. 2539-2559
139. “Characterization of the microscale/nanoscale hierarchical microstructure of an as-cast CrMnFeNiCu high-entropy alloy with promising mechanical properties”
Sang Hun Shim, Hesam Pouraliakbar, Hossein Minouei, Mohsen Saboktakin Rizi, Jun Hyun Han, Sun Ig Hong
Journal of Alloys & Compounds Vol. 954 (2023) p. 170091
138. “Effects of pre/post-aging treatment on the mechanical properties and texture of asymmetrically rolled 6061 aluminum alloy: formability and planar anisotropy”
Wonkee Chae, Minkyung Jeong, Donggil Lee, Jongbeom Lee, Dong Won Chun, Soo Yeol Lee, Soon-Ku Hong, Su Hyeon Kim, and Jun Hyun Han
Journal of Materials Research & Technology (JMR&T) Vol. 24 (2023) p. 9476-9490
137. “Microstructural and physicochemical origins of electroless copper deposition on graphite enhanced by acid pretreatment”
Ari Shin, Bong-Kyu Kim, Minkyoung Kim, Minkyung Jeong, Donggil Lee, Hyunwoo Ha, Soo Yeol Lee, Chunjoong Kim, Soohyung Park, Hyun You Kim, Chang-Yong Nam, Jun Hyun Han
Materials Chemistry and Physics Vol. 295 (2023) p. 127118
[2022]
136. “Effect of fiber alignment on mechanical properties of chopped graphite fiber-reinforced copper-matrix composites: Designing fiber alignment in various stress conditions”
Minkyoung Kim, Hohyeong Lee, Minkyung Jeong, Jun Zhang, Donggil Lee, Jun Hyun Han
Materials Today Communications Vol. 33 (2022) p. 104854
135. “Supporting data for strengthening and deformation behavior of as-cast CoCrCu1.5MnNi high entropy alloy with micro-/nanoscale precipitation”
Sang Hun Shim, Hesam Pouraliakbar, Byoung Ju Lee, Yong Keun Kim, Mohsen Saboktakin Rizi, Jun Hyun Han, Sun Ig Hong
Data In Brief Vol. 45 (2022) p. 108567
134. “Bimetallic Additively Manufactured Structure (BAMS) of Inconel 625 and Austenitic Stainless Steel: Effect of Heat-treatment on Microstructure and Mechanical Properties”
You Sub Kim, Daeho Yun, Jun Hyun Han, Md. R. U. Ahsan, Changwook Ji, Duck Bong Kim, Soo Yeol Lee
International Journal of Advanced Manufacturing Technology Vol. 121 (2022) p. 7539-7549
133. “Real-time monitoring of the dehydrogenation behavior of a Mg2FeH6-MgH2 composite by in situ transmission electron microscopy”
Juyoung Kim, Julien O. Fadonougbo, Jeehwan Bae, Min Kyung Cho, Jaeyoung Hong, Young Whan Cho, Gyeung-Ho Kim, Jun Hyun Han, Young-Su Lee, Jung Young Cho, Kyu Hyoung Lee, Jin-Yoo Suh, Dong Won Chun
Advanced Functional Materials Vol. 32 (2022) p. 2204147
132. “Evaluation of supercritical carbon dioxide corrosion by high temperature oxidation experiments and machine learning models”
Hobyung Chae, Sukho Seo, Yong Chan Jung, E-Wen Huang, Jayant Jain, Jun Hyun Han, and Soo Yeol Lee
Metallurgical and Materials Transactions A Vol. 53, No.7 (2022) p. 2614-2626
131. “Enhancing the thermoelectric properties of powder metallurgically produced BiSbTe alloy through feasible electroless surface plating method”
Pathan Sharief, Babu Madavali, Peyala Dharmaiah, Jun Woo Song, Gian Song, Youhan Sohn, Jun Hyun Han, Sung Ho Song, Soon Jik Hong
Journal of the European Ceramic Society (JECS) Vol. 42 (2022) p. 3473-3479
[2021]
130. “Thermal Properties according to Content and Alignment of Carbon Fiber in Cu Matrix Composite Reinforced with Chopped Carbon Fiber”
Minkyoung Kim, Jun Hyun Han
Korean Journal of Materials Research Vol. 31, No. 11 (2021) p. 626-634
129. “Thermal properties and failure mechanism of graphene nanoplatelet-reinforced copper composites fabricated using electroless plating”
Jun Zhang, Jun Hyun Han
J of Alloys & Compounds Vol. 893 (2021) p. 162233
128. “Reduction of thermal conductivity through complex microstructure by dispersion of carbon nanofiber in P-type Bi0.5Sb1.5Te3 alloys”
P. Sharief, B. Madavali, Y. Sohn, J. H. Han, G. Song, S. H. Song, S. J. Hong
Archives Metallurgy and Materials Vol. 66 No. 3 (2021) p. 803-808
127. “Investigation of graphene dispersion on thermoelectric, magnetic, and mechanical properties of p-type Bi0.5Sb1.5Te3 alloys”
Pathan Sharief, Babu Madavali, Sung Ho Song, Jin Kyu Lee, Ki Buem Kim, Jongtae Kim, Donghwan Kim, Jun Hyun Han, Soon-Jik Hong
Materials Chemistry and Physics Vol. 266 (2021) p. 124512
[2020]
126. “Reconstruction and Size Prediction of Prior Austenite Grain Boundary (PAGB) using Artificial Neural Networks”
Bong-Kyu Kim, Nam Hoon Goo, Jong Hyuk Lee, Jun Hyun Han
Korean Journal of Metals & Materials Vol. 58 No. 12 (2020) p. 822-829
125. “Effects of Initial Precipitate on Shear Deformation during Asymmetric Rolling of Al-Mg-Si Alloy: Texture and Formability” Wonkee Chae, Bong-Kyu Kim, Jongbeom Lee, Jun Hyun Han
Korean Journal of Metals & Materials Vol. 58, No. 10 (2020) p. 703-714
124. “Effect of dispersion and alignment of graphite fibers on thermal expansion induced fracture of graphite fiber/copper composite”
June-Young Lee, Youhan Sohn, Hye Sung Kim, Jun Hyun Han
Materials Today Communications Vol. 25 (2020) p. 101450
123. “Effects of tempering temperature and time on microstructure and mechanical property of Cu-Sn alloy”
Museob Jeong, Hohyung Lee, Jun Hyun Han
Journal of the Korean Society for Heat Treatment Vol. 33, No. 2 (2020) p. 65-71
122. “Failure mechanism of Cu/PET flexible composite film with anisotropic interface nanostructure”
Sang Jin Park, Jun Hyun Han
Korean Journal of Materials Research Vol. 30, No. 3 (2020) p. 105-110
[2019]
121. “Design of Mg-6wt%Al alloy with high toughness and corrosion resistance prepared by mechanical alloying and spark plasma sintering”,
Chan Soo Lee, Hee Chang LEE, Gyeung-Ho Kim, Jun Hyun Han, Woo Jin Kim, Hye Sung Kim
Materials Characterization Vol. 158 (2019) 109995
120. “Effects of Hot Asymmetric Rolling on Microstructure and Formability of Aluminum Alloys”
Museob Jeong, Jongbeom Lee and Jun Hyun Han
Korean Journal of Materials Research Vol. 29, No. 10 (2019) p. 647-655
119. “Effects of Reversing the Coiling Direction on the Force-Deflection Characteristics of Nickel-Titanium Closed-Coil Spring”
Hwan-Hyung Park, Suk-Hwan Jung, Juil Yoon, Kwang Koo Jee, Jun Hyun Han, Seung-Hak Baek
Korean Journal of Orthodontics Vol. 49 (2019) p. 214-221
118. “Thermo-elastic strain analysis in crystallographic-texture-aligned Fe–Pd magnetic shape memory alloy”
Jun Hyun Han, Taeyang Han, Youhan Sohn, Dong-Ik Kim, Hye Sung Kim, Sungho Jin
Scripta Materialia Vol. 167 (2019) p. 56-60.
117. “The effect of the shape and alignment of reinforcing grahite phases on the thermal conductivity and coefficient of thermal expansion of graphite/copper composites”
Youhan Sohn, Taeyang Han, Jun Hyun Han
Carbon Vol. 149 (2019) p. 152-164.
116. “Reduction of magnetic resonance image artifacts of NiTi implant by carbon coating”
Taeyang Han, Youhan Sohn, Sang Jin Park, Yu-Chan Kim, Kang Sik Lee, Soon-Gil Yoon, Dojin Kim, and Jun Hyun Han
Materials Science & Engineering C Vol. 98 (2019) p. 1-8.
115. “Optimization for high speed manufacturing of Ti-6Al-4V alloy by a selective laser melting technique”
Kang Pyo Lee, Kang Min Kim, Suk Hyun Kang, Jun Hyun Han, Kyung Hwan Jung
Journal of the Korean Crystal Growth and Crystal Technology Vol. 28, No. 5 (2018) p. 217-221.
Hwan-Hyung Park, Suk-Hwan Jung, Juil Yoon, Kwang Koo Jee, Jun Hyun Han, Seung-Hak Baek
Korean Journal of Orthodontics Vol. 49 (2019) p. 214-221
118. “Thermo-elastic strain analysis in crystallographic-texture-aligned Fe–Pd magnetic shape memory alloy”
Jun Hyun Han, Taeyang Han, Youhan Sohn, Dong-Ik Kim, Hye Sung Kim, Sungho Jin
Scripta Materialia Vol. 167 (2019) p. 56-60.
117. “The effect of the shape and alignment of reinforcing grahite phases on the thermal conductivity and coefficient of thermal expansion of graphite/copper composites”
Youhan Sohn, Taeyang Han, Jun Hyun Han
Carbon Vol. 149 (2019) p. 152-164.
116. “Reduction of magnetic resonance image artifacts of NiTi implant by carbon coating”
Taeyang Han, Youhan Sohn, Sang Jin Park, Yu-Chan Kim, Kang Sik Lee, Soon-Gil Yoon, Dojin Kim, and Jun Hyun Han
Materials Science & Engineering C Vol. 98 (2019) p. 1-8.
115. “Optimization for high speed manufacturing of Ti-6Al-4V alloy by a selective laser melting technique”
Kang Pyo Lee, Kang Min Kim, Suk Hyun Kang, Jun Hyun Han, Kyung Hwan Jung
Journal of the Korean Crystal Growth and Crystal Technology Vol. 28, No. 5 (2018) p. 217-221.
[2018]
114. “Reduction of SnO2 by a Mixed Gas of Methane and Hydrogen”
Taeyang Han, Youhan Sohn, Sangyeol Kim, Hyun-Chul Jung, Hyun You Kim, San-ro Lee, Jun Hyun Han
Korean Journal of Materials Research Vol. 28, No. 12 (2018) p. 725-731.
113. “Effects of Graphite Shape and Composite Fabricating Method on Mechanical Properties of Graphite/Copper Composites”
Youhan Sohn, Jun Hyun Han
Korean Journal of Materials Research, Vol. 28, No. 10 (2018) p. 601-609.
112. “Effects of heat treatment temperature and cooling method on microstructure and hardness of Cu-22Sn alloy”
Museob Jeong, Ari Shin, Jun Hyun Han
J. of the Korean Society for Heat Treatment Vol. 31, No. 3 (2018) p. 104-110.
111. “Modification of the amount of CH4 supplied for the efficient CH4 reduction of SnO2”
Taeyang Han, Youhan Sohn, Hyunwoo Ha, Mi Yoo, Sangyeol Kim, Sang-ro Lee, Hyun You Kim, Jun Hyun Han
Korean Journal of Metals & Materials Vol. 56, No. 5 (2018) p. 384-391.
110. “Microstructure evaluation and electrochemical properties of HRDSR AZ61-X (X = Ca, Ti) alloys”
Min Gyu Kim, Woo Jin Kim, Gyeung-ho Kim, Kwon-Koo Cho, Jun Hyun Han, Hye Sung Kim
J. of Nanoscience and Nanotechnology Vol. 18, No. 9 (2018) p. 6081-6089.
109. “Effects of post-annealing and strong deformation process on the mechanical and corrosion properties of a Mg-Mn alloy for biomedical application”
Min Gyu Kim, Jin Kon Kim, Hye Sung Kim, Woo Jin Kim, Jun Hyun Han
J. of the Korean Physical Society Vol. 72, No. 6 (2018) p. 692-698.
108. “Highly Adhesive and High Fatigue-Resistant Copper/PET Flexible Electronic Substrates”
Sang Jin Park, Tae-Jun Ko, Juil Yoon, Myoung-Woon Moon, Kyu Hwan Oh, Jun Hyun Han
Applied Surface Science Vol. 427 (2018) p. 1-9.
107. “Study on microstructure and thermal properties of a CNF/Cu nanocomposite fabricated using electroless plating”,
Ari Shin ,Yong-In Kim, Se-Hyun Ko, Jun Hyun Han
J. of Alloys & Compounds Vol. 737 (2018) p.21-30.
114. “Reduction of SnO2 by a Mixed Gas of Methane and Hydrogen”
Taeyang Han, Youhan Sohn, Sangyeol Kim, Hyun-Chul Jung, Hyun You Kim, San-ro Lee, Jun Hyun Han
Korean Journal of Materials Research Vol. 28, No. 12 (2018) p. 725-731.
113. “Effects of Graphite Shape and Composite Fabricating Method on Mechanical Properties of Graphite/Copper Composites”
Youhan Sohn, Jun Hyun Han
Korean Journal of Materials Research, Vol. 28, No. 10 (2018) p. 601-609.
112. “Effects of heat treatment temperature and cooling method on microstructure and hardness of Cu-22Sn alloy”
Museob Jeong, Ari Shin, Jun Hyun Han
J. of the Korean Society for Heat Treatment Vol. 31, No. 3 (2018) p. 104-110.
111. “Modification of the amount of CH4 supplied for the efficient CH4 reduction of SnO2”
Taeyang Han, Youhan Sohn, Hyunwoo Ha, Mi Yoo, Sangyeol Kim, Sang-ro Lee, Hyun You Kim, Jun Hyun Han
Korean Journal of Metals & Materials Vol. 56, No. 5 (2018) p. 384-391.
110. “Microstructure evaluation and electrochemical properties of HRDSR AZ61-X (X = Ca, Ti) alloys”
Min Gyu Kim, Woo Jin Kim, Gyeung-ho Kim, Kwon-Koo Cho, Jun Hyun Han, Hye Sung Kim
J. of Nanoscience and Nanotechnology Vol. 18, No. 9 (2018) p. 6081-6089.
109. “Effects of post-annealing and strong deformation process on the mechanical and corrosion properties of a Mg-Mn alloy for biomedical application”
Min Gyu Kim, Jin Kon Kim, Hye Sung Kim, Woo Jin Kim, Jun Hyun Han
J. of the Korean Physical Society Vol. 72, No. 6 (2018) p. 692-698.
108. “Highly Adhesive and High Fatigue-Resistant Copper/PET Flexible Electronic Substrates”
Sang Jin Park, Tae-Jun Ko, Juil Yoon, Myoung-Woon Moon, Kyu Hwan Oh, Jun Hyun Han
Applied Surface Science Vol. 427 (2018) p. 1-9.
107. “Study on microstructure and thermal properties of a CNF/Cu nanocomposite fabricated using electroless plating”,
Ari Shin ,Yong-In Kim, Se-Hyun Ko, Jun Hyun Han
J. of Alloys & Compounds Vol. 737 (2018) p.21-30.
[2017]
106. “Reduction of SnO2 by CH4 for Efficient Sn Recovery”
Hyunwoo Ha, Mi Yoo, Hyesung An, Kihyun Shin, Taeyang Han,Youhan Sohn, Sangyeol Kim, Sang-Ro Lee, Jun Hyun Han, Hyun You Kim
Scientific Reports Vol. 7 (2017) p. 14427.
105. “Effect of Plating Conditions on Electroless Copper Plating on SiC Fabric”,
Kee Hwan Lee, Youhan Sohn, Taeyang Han, Kyung Jin Lee, Hye Sung Kim, Jun Hyun Han
J. of Korean Inst. Surf. Eng. Vol. 50, No. 4 (2017) p. 244-250.
104. “Direct patterning of Cu circuit on polymer using selective surface modification and electroless plating without pretreatments”
Sang Jin Park, Tae-Jun Ko, Juil Yoon, Myoung-Woon Moon, Kyu Hwan Oh, and Jun Hyun Han
Applied Surface Science, Vol. 396 (2017) p. 1678-1684
106. “Reduction of SnO2 by CH4 for Efficient Sn Recovery”
Hyunwoo Ha, Mi Yoo, Hyesung An, Kihyun Shin, Taeyang Han,Youhan Sohn, Sangyeol Kim, Sang-Ro Lee, Jun Hyun Han, Hyun You Kim
Scientific Reports Vol. 7 (2017) p. 14427.
105. “Effect of Plating Conditions on Electroless Copper Plating on SiC Fabric”,
Kee Hwan Lee, Youhan Sohn, Taeyang Han, Kyung Jin Lee, Hye Sung Kim, Jun Hyun Han
J. of Korean Inst. Surf. Eng. Vol. 50, No. 4 (2017) p. 244-250.
104. “Direct patterning of Cu circuit on polymer using selective surface modification and electroless plating without pretreatments”
Sang Jin Park, Tae-Jun Ko, Juil Yoon, Myoung-Woon Moon, Kyu Hwan Oh, and Jun Hyun Han
Applied Surface Science, Vol. 396 (2017) p. 1678-1684
[2016]
103. “Ultra-thin metal films with defined topographical structures as in vitro cell culture platforms for unveiling vascular cell behaviors”
Indong Jun, Yong-Woo Chung, Jimin Park, Hyung-Seop Han, Jaeho Park, Saeromi Kim, Hyungjung Lee, Sang Hoon Kim, Jun-Hyun Han, Hyunjung Kim, Hyun-Kwang Seok, Yu-Chan Kim, Hojeong Jeon
Advanced Healthcare Materials, Vol. 5 No. 18 (2016) p. 2396-2405.
102. “Effects of Acid Treatment of Carbon on Electroless Copper Plating”
Ari Shin, Jun Hyun Han
J. of Korean Inst. Surf. Eng., Vol. 49, No. 3 (2016) p. 265-273
101. “Effects of plating conditions on thickness and surface roughness of electroless plated Cu layer”
Kee Hwan Lee, Sang Jin Park, Jun Hyun Han
Korean Journal of Metals & Materials, Vol. 54, No. 4 (2016) p. 237-245
100. “Multi-Wall Carbon Nanotubes-Embedded Lithium Cobalt Phosphate Composites with Reduced Resistance for High Voltage Lithium-Ion Batteries”
Tae Kyoung Kim, Cyrus S Rustomji, Hyung-Man Cho, Dongwon Chun, Duyoung Choi, Elizabeth Caldwell, Youngjin Kim, Jun Hyun Han, Sungho Jin
Electronic Materials Letters, Vol. 12, No.1 (2016) p. 147-155
99. “Synthesis and consolidation behavior of Al/AlN composite powders by reactive RF thermal plasma spraying”
Sung Chul Cho, Chulwoong Han, Hanshin Choi, Hae Sung Kim, Sungho Jin, Jun Hyun Han
Powder Technology, Vol. 287 (2016) p. 395-402
103. “Ultra-thin metal films with defined topographical structures as in vitro cell culture platforms for unveiling vascular cell behaviors”
Indong Jun, Yong-Woo Chung, Jimin Park, Hyung-Seop Han, Jaeho Park, Saeromi Kim, Hyungjung Lee, Sang Hoon Kim, Jun-Hyun Han, Hyunjung Kim, Hyun-Kwang Seok, Yu-Chan Kim, Hojeong Jeon
Advanced Healthcare Materials, Vol. 5 No. 18 (2016) p. 2396-2405.
102. “Effects of Acid Treatment of Carbon on Electroless Copper Plating”
Ari Shin, Jun Hyun Han
J. of Korean Inst. Surf. Eng., Vol. 49, No. 3 (2016) p. 265-273
101. “Effects of plating conditions on thickness and surface roughness of electroless plated Cu layer”
Kee Hwan Lee, Sang Jin Park, Jun Hyun Han
Korean Journal of Metals & Materials, Vol. 54, No. 4 (2016) p. 237-245
100. “Multi-Wall Carbon Nanotubes-Embedded Lithium Cobalt Phosphate Composites with Reduced Resistance for High Voltage Lithium-Ion Batteries”
Tae Kyoung Kim, Cyrus S Rustomji, Hyung-Man Cho, Dongwon Chun, Duyoung Choi, Elizabeth Caldwell, Youngjin Kim, Jun Hyun Han, Sungho Jin
Electronic Materials Letters, Vol. 12, No.1 (2016) p. 147-155
99. “Synthesis and consolidation behavior of Al/AlN composite powders by reactive RF thermal plasma spraying”
Sung Chul Cho, Chulwoong Han, Hanshin Choi, Hae Sung Kim, Sungho Jin, Jun Hyun Han
Powder Technology, Vol. 287 (2016) p. 395-402
[~2015]
98. “Carbon fiber/Aluminum composites fabrication using wettability control”
Yongbeom Lee, Sangjin Park, Jun Hyun Han
Composites Research, Vol. 28, No. 5 (2015) p. 254-259.
97. “Etchless Cu Circuit Fabrication Using Wettability Difference and Electroless Plating”
Sang-Jin Park, Tae-Jun Ko, Juil Yoon, Myoung-Woon Moon, Jun Hyun Han
Korean Journal of Materials Research, Vol. 25, No. 11 (2015) p. 622-629.
96. “Fabrication of AlN/Cu Composites Using Electroless Plating and Evaluation of Thermal Properties as AlN Particle Size”
Sung Chul Cho, Se-Hyun Ko, Hye Sung Kim, Jae-Pyung Ahn, Jun Hyun Han
Korean Journal of Metals & Materials, Vol. 53, No. 12 (2015) p. 911-918.
95. “Texture and magnetic properties of Fe thin films fabricated by field-sputtering vs field-annealing”
Sang Jin Park, Chin-Hung Liu, Hae Sung Kim, No Jin Park, Sungho Jin, Jun Hyun Han
Thin Solid Films, Vol. 594 (2015) p. 178-183.
94. “Microstructure and Properties of Silicon-Incorporated DLC Film Fabricated Using HMDS Gas and RF-PECVD Process”
Byung Ju Song, Woo Jin Song, Jun Hyun Han, Ka Ram Kim, Su Jong Yoon, Tae Gyu Kim, Jin kon Kim, Hyun Cho, Gyeung-Ho Kim, Dae Youn Hwang, and Hye Sung Kim
J. Nanoscience & Nanotechnology, Vol.14 (2014) p.9124-9130
93. “Corrosion Behavior of Magnesium Powder Fabricated by High-Energy Ball Milling and Spark Plasma Sintering”
Ka Ram Kim, Jin Woo Ahn, Gyeung-Ho Kim, Jun Hyun Han, Kwon Koo Cho, Jae-Seung Roh, Woo Jin Kim, and Hye Sung Kim
Metals and Materials International, Vol. 20 (2014) p.1095-1101
92. “Dynamic recrystallization in high-purity aluminum single crystal under frictionless deformation mode at room temperature”
Yong Seok Choi, Kyung Il Kim and Kyu Hwan Oh, Heung Nam Han, Suk Hoon Kang, Jinsung Jang, Jun Hyun Han
J. of Materials Research, Vol.28 No.20 (2013) p.2829-2834.
91. “Thermoelastic strain in polycrystalline Fe-Pd shape memory alloy thin film”
Jun Hyun Han, Juil Yoon, Kwang Koo Jee, Joost J. Vlassak
Thin Solid Films. Vol.546 (2013) p.196-199.
90. “Effects of Cu interlayer on the wettability of aluminum on carbon”
Young Jin Ko, Juil Yoon, Joonho Lee, Jun Hyun Han
J. of Alloys & Compounds, Vol.574 (2013) p.526-531.
89. “Effect of change in coil orientation for SMA spring”
K.E. Kim, J.H. Han, Y.M. Sung, K.K. Jee, W.Y. Jang
J. of Alloys & Compounds. Vol.577S (2013) p.S741-S744.
88. “Tb0.3Dy0.7Fe1.9/PbZr0.52Ti0.48O3 micro-bridge on SiNx thin film for low frequency magnetic sensing applications”
Dong Gun Lee, Jun Hyun Han, Junwoo Lee, Wook Choi, Yong Kyung Yoo, Jinseok Kim, Kyo Seon Hwang, Tae Song Kim, Dong Won Chun, Yu-Chan Kim, Kyu Hyung Lee, and Jeong Hoon Lee
Japanese Journal of Applied Physics, Vol.52 (2013) p.10MC10-1~ 10MC10-4.
87. “Improvement of actuating properties of a SMA coil spring by change in coil orientation”
K. K. Jee, J. H. Han, W. Y. Jang
Materials Science Forum, Vols. 738-739 (2013) p.589-594
86. “Ultra-sensitive magnetoelectric microcantilever at a low frequency”
Dong Gun Lee, Sung Man Kim, Yong Kyung Yoo, Jun Hyun Han, Dong Won Chun, Yu-Chan Kim, Jinseok Kim, Kyo Seon Hwang, Tae Song Kim, Won Woo Jo, Hyungsuk Kim, Seung-Ho Song and Jeong Hoon Lee
Applied Physics Letters, Vol. 101 (2012) p.182902-1∼4.
85. “Effects of CNF dispersion on mechanical properties of CNF reinforced A7xxx nanocomposites”
Jun-Young Lim, Se-Il Oh, Yu-Chan Kim, Kwang-Koo Jee, Yun-Mo Sung, Jun Hyun Han
Mater. Sci. & Eng. A, Vol.556 (2012) p.337-342
84. “Fabrication of carbon nanofiber reinforced aluminum alloy nanocomposites by a liquid process”
Se-Il Oh, Jun-Young Lim, Yu-Chan Kim, Juil Yoon, Gyeung-Ho Kim, Joonho Lee, Yun-Mo Sung, Jun-Hyun Han
J. of Alloys & Compounds, Vol.542 (2012) p.111-117
83. “Magnetic anisotropy and morphology of Fe epitaxial layers grown on MgO/InAs heterostructures”
Kyung-Ho Kim, Hyung-jun Kim, Jae-Pyung Ahn, Jun-Hyun Han, Jun Woo Choi, and Joonyeon Chang
J. of Nanoscience and Nanotechnology (JNN), Vol.12, No.2 (2012) p.1573-1576
82. “Microstructural Changes of Epitaxial Fe/MgO layers grown on InAs(001) substrates”
Kyung-Ho Kim, Hyung-jun Kim, Jae-Pyoung Ahn, Jun Woo Choi, Jun-Hyun Han, Rizcy Tamarany, Seung-Cheol Lee, Joonyeon Chang, Young Keun Kim
Crystal Growth & Design, Vol.11 (2011) p.2889-2896
81. “Effects of external magnetic field on magnetic properties of sputtered magnetic thin film”
Hyun Tae Ahn, Sang Ho Lim, Kwang Koo Jee, Jun Hyun Han
J. of Korea Inst. of Met. & Mater. Vol. 49, No. 6 (2011) p.501-513.
80. “Asymmetric rolling of twin-roll cast Al alloy sheet: Mechanical properties and formability”,
Boo-Hyeon Cheon, Jun-Hyun Han, Hyoung-Wook Kim, Jae-Chul Lee
J. of Korea Inst. of Met. & Mater. Vol. 49, No. 3 (2011) p.243-249.
79. “Effects of aging on microstructure and strengthening in 7050 Al alloy sheet processed by equal channel angular rolling (ECAR)”
Jun-Hyun Han
Materials Transactions, (2010) Vol.51, No.11 (2010) p.2109-2112
78. “New SMA Actuator with High Energy Efficiency and Quick Response”
Kwang Koo Jee, Jun Hyun Han, J.M. Park, Woo Yang Jang
Materials Science Forum, Vol.654-656 (2010) p.2111-2113.
77. “Shape Memory Effect in Fe-Pd Magnetic Shape Memory Alloy Thin Films”
Jun Hyun Han, Hyun Tae Ahn, Tae Hyun Kim, Kwang Koo Jee
Materials Science Forum, Vol.654-656 (2010) p.2107-2110.
76. “Characterization on Titanium Surfaces and its effect of Photocatalytic Bactericidal Activity”
H. C. JOO, Y. J. Lim, M. J. Kim, H. B. Kwon, J. H. Han
Applied Surface Science, Vol.257 (2010) p.741-746.
75. “High-Frequency Magnetic Properties of Soft Magnetic Cores Based on Nanocrystalline Alloy Powder Prepared by Thermal Oxidation”
T. H. Kim, K. K. Jee, D. J. Byun, Yoon B. Kim, J. H. Han
J. of Magnetism and Magnetic Materials (JMMM), Vol. 322 (2010) p.2423-2427.
74. “A study on powder mixing for high fracture toughness and wear resistance of WC-Co-Cr coatings sprayed by HVOF”
C. W. Lee, J. H. Han, J. Yoon, M. C. Shin, S. I. Kwun
Surface & Coatings Technology, Vol. 204 (2010) p. 2223-2229.
73. “Wrinkle-based measurement of elastic modulus of Pt nano-scale thin film deposited on polymeric substrate: verification and uncertainty analysis”
Hyun-Ju Choi, Jae-Hyun Kim, Hee-Jung Lee, Sun-Ah Song, Hak-JooLee, Jun-Hyun Han, Myung-Woon Moon
Experimental Mechanics, Vol. 50, No.5 (2010) p.635-641.
72. “Microstructure and mechanical properties of twin-rolled strip-cast Al-5.5Mg-0.02Ti ally sheet”
Boo-Hyoen Cheon, Jun-Hyun Han, Hyoung-Wook Kim, Jae-Chul Lee
J. of Korea Inst. of Met. & Mater. Vol. 48, No. 5 (2010) p.387-393.
71. “A Measurement of Elastic Moduli for Tungsten Films on Polymer Substrate Using Wrinkling Analysis”,
Myoung-Woon Moon, Jun Hyun Han
Applied Surface Science, Vol. 256 (2009) p. 593-596.
70. “Nanoscale ripples on polymers created by focused ion beam”
Myoung-Woon Moon, Jun Hyun Han, Ashkan Vaziri, Eun Kyu Her, Kyu Hwan Oh, Kwang-Ryeol Lee, and John W. Hutchinson
Nanotechnology. Vol.20 (2009) p.115301.
69. “Effects of die geometry on variation of the deformation rate in equal channel angular pressing”
Jun-Hyun Han, Hyung-Joon Chang, Kwang-Koo, Kyu Hwan Oh
Metals and Materials International, Vol.15 (2009) p.439-445.
68. “Fe-Based Nano-Structured Powder Reinforced Zr-Based Bulk Metallic Glass Composites by Powder Consolidation”
Seung Mok Cho, Jun Hyun Han, Jin Kyu Lee, Yu Chan Kim
Kor. J. Mater. Res., Vol. 19, No.9 (2009) p.504-509.
67. “Effects of powder mixing on the mechanical properties of thermally sprayed WC-Co-Cr coating layers”
Chang Woo Lee, Jun Hyun Han, Myung Chul Shin, S. I. Kwun
J. of Korea Inst. of Met. & Mater. Vol. 47 (2009) p. 290-296.
66. “Effects of surfactant and preplate process on electroless copper plating on carbon nano-fiber”
Jun Hyun Han, Hyun Kwang Seok, Sang Soo Lee, Kwang Koo Jee
J. of Korean Powder Metallurgy Institute, Vol. 16, No.2 (2009) p. 131-137.
65. “New method for improving properties of SMA coil springs”,
K. K. Jee, J. H. Han, Y. B. Kim, D. H. Lee, W. Y. Jang
European Physical Journal Special Topics, Vol. 158, (2008) p. 261-266.
64. “High-throughput analysis of thin-film stresses using arrays of micromachined cantilever beams”
Hyun-Jong Kim, Jun-Hyun Han, Roy Kaiser, Kyu Hwan Oh, Joost J. Vlassak
Review of Scientific Instruments, Vol.79 (2008) p.045112-1~045112-7.
63. “Evaluation of formability and planar anisotropy based on textures in aluminum alloys processed by a shear deforming process”
Jun-Hyun Han, Jin-Yoo Suh, Kwang-Koo Jee, Jae-Chul Lee
Mater. Sci. & Eng. A, Vol.477 (2008) p.107-120.
62. “Soft magnetic properties of patterned Co-based amorphous wires with various dimensions”,
Chang Bean Park, Do Hun Kim, Dong Won Chun, Jun Hyun Han, Heon Jin Choi, Won Young Jeung
Physica Status Solidi C, Vol.4, No.12 (2007), p. 4581-4584
61. “Giant magnetoimpedence effects in micro-patterned Co52Fe32B11Si5 amorphous ribbons”
Sun Hee Park, Dong Won Chun, Jun Hyun Han, Young-Ho Kim and Won Young Jeung
Physica Status Solidi A, Vol.204, No.12 (2007) p.4071-4074
60. “Effects of external magnetic field on magnetic properties and surface morphology of electrodeposited CoFeNi alloys”
Hyun Kyung Kim, Dong Won Chun, Jun Hyun Han, Kwang Bum Kim and Won Young Jeung
Physica Status Solidi A, Vol. 204, No.12 (2007), p. 4104-4107
59. “Formation of nitride film on amorphous ribbon using chemical vapor deposition”,
Jun-Hyun Han, Tae-Hoon Kim Jin-Kook Yoon, Kwang-Koo Jee, Kwang-Yoon Kim
Mater. Sci. & Eng. A, Vol. 449-451 (2007) p.741-746
58. “Adhesion Properties of Copper/Polyimide Film Modified by Reactive Ion Etching (RIE)”,
W. J. Lee, Yoon B. Kim, W.Y. Lee, S. H. Han, J. H. Han, K. K. Jee
Solid State Phenomena Vol.124-126, (2007) p.1593-1596
57. “Suggestion of Pipe Coupling Method for Maximum and Uniform Joining Stress”
K. K. Jee, J. H. Han, W. S. Jung and W. Y. Jang
Materials Transactions Vol.47, No.3, (2006) p.750-752
56. “A method of pipe joining using shape memory alloys”
K. K. Jee, J. H. Han, W. Y. Jang
Mater. Sci. & Eng. A, Vol. 438-440 (2006) p.1110-1112
55. “Effect of grain size on amount of deformation-induced e-martensite and shape memory effect in Fe-Mn alloy”
K. K. Jee, J. H. Han, Y. B. Kim, W. Y. Jang
International Journal of Applied Electromagnetics and Mechanics Vol. 23, (2006) p.59-64
54. “Effect of electromagnetic stirring on orientation distribution function of primary solid phase of Al-Cu alloy”
Dock-Young Lee, Jun-Hyun Han, Suk-Won Kang, Jung-Hwa Mun, Ki-Bae Kim
Materials Science Forum Vols. 510-511 (2006) pp. 526-529.
53. “Microstructure and magnetoresistance of sputtered Bismuth thin Films upon annealing”
Joonyeon Chang, Jun Hyun Han, H. J. Kim, M. H. Jeon, W. Y. Lee
Journal of Applied Physics Vol. 98, No. 2, (2005) p. 023906
52. “Low-temperature cyclic oxidation behavior of MoSi2/Si3N4 nanocomposite coating formed on Mo substrate at 773K”,
Jin-Kook Yoon, Kyung-Hwan Lee, Jun-Hyun Han, Gyeung-Ho Kim, Jung-Mann Doh, Kyung-Tae Hong
Surface Coatings & Technology Vol.200, No.7 (2005) p.2537-2546
51. Jun-Hyun Han, Jin-Kook Yoon, Jong-Woo Park, Kyu Hwan Oh, Jae-Chul Lee
“A Comparative Study of Two Shear Deforming Processes in Texture Evolution” Materials Transactions Vol.46, No.5 (2005) p.1064-1069
50. “Microstructure and oxidation property of NbSi2/Si3N4 nanocomposite coating formed on Nb substrate by nitridation process followed by pack siliconizing process”
Jin-Kook Yoon, Kyung-Hwan Lee, Jun-Hyun Han, In-Jin Son, Jung-Mann Doh, and Gyeung-Ho Kim
Intermetallics, Vol.13, No.11 (2005) p.1146-1156
49. “Microstructure of NbSi2/SiC nanocomposite coating formed on Nb substrate”
Keun-Hyung Son, Jin-Kook Yoon, Jun-Hyun Han, Gyeung-Ho Kim, Jung-Mann Doh, Seong-Rae Lee
J. of Alloys and Compounds, Vol. 395 (2005) p. 185-191.
48. “Microstructure of MoSi2-base nanocomposite coatings formed on Mo substrates by chemical vapor deposition”
Jin-Kook Yoon, Keun-Hyung Son, Jun-Hyun Han, Gyeung-Ho Kim, Jung-Mann Doh, Kyung-Tae Hong
Zeitschrift fur Metallkunde, Vol. 96, No. 3 (2005) p. 281-290.
47. “Controlling the textures of the Al alloy sheet via dissimilar channel angular pressing”
Jun Hyun Han, M. Y. Huh, Jin Yoo Suh, and Jae Chul Lee
Mater. Sci. & Eng. A. Vol 394 (2005) p. 60-65
46. “Effect of Heat Treatment Temperature on Amount of Stress-Induced e Martensite in an Fe-Mn Based Alloy”
K.K. Jee, J. H. Han, W.Y. Jang
J. of the Korean Society for Heat Treatment, Vol. 17, No. 6 (2004) p.342-345.
45. “Effects of the initial textures and the deformation history on the texture evolution in the Al alloy during the shear deforming process”
Jun-Hyun Han, Jin-Yoo Suh, Kyu Hwan Oh, Jae-Chul Lee
Acta Materialia, Vol.52, No.16 (2004) p.4907-4918.
44. “Orientation Rotation Behaviors in Aluminum Alloys during Dissimilar Channel Angular Pressing”
Jun-Hyun Han, Jin-Yoo Suh, Kyu Hwan Oh, Jae-Chul Lee
Materials Transactions, Vol.45, No.1 (2004) p.125-130.
43. “In-situ Orientation Rotation Behavior Study during Tensile Deformation of Aluminum Single Crystal and Polycrystal”
Jun-Hyun Han, Dong-Ik Kim, Kwang-Koo Jee, Kyu Hwan Oh
Materials Science Forum, Vol. 449-452, (2004) p.593-596
42. “Measurement of volume fraction of ε martensite in Fe-Mn based alloy”
K. K. Jee, J. H. Han and W. Y. Jang
Mater. Sci. & Eng. A, Vol. A378 (2004) p. 319-322
41. “Characteristic of textures evolution induced by equal channel angular pressing in 6061 aluminum sheets”
Qin Jining, Jun-Hyun Han, Zhang Guoding, Jae-Chul Lee
Scripta Materialia, Vol. 51 (2004) p. 185-189
40. “Low-Temperature Cyclic Oxidation Behavior of MoSi2/SiC Nanocomposite Coating Formed on Mo Substrate”
Jin-Kook Yoon, Kyung-Hwan Lee, Jun-Hyun Han, Gyeung-Ho Kim, Jung-Mann Doh, Kyung-Tae Hong
Materials Transactions, Vol.45 No.7 (2004) p. 2435-2442
39. “Effect of Accumulative Strain on the Texture Evolution in 1050 Al alloys Processed by Continuous Confined Strip Shearing”
Jun-Hyun Han, Kyu-Hwan Oh, Jae-Chul Lee
Mater. Sci. & Eng. A, Vol. 387-389 (2004) p. 240-243.
38. “Evolution of crystallographic orientations in aluminum single crystal during tensile deformation”
Jun-Hyun Han, Dong-Ik Kim, Kwang-Koo Jee, Kyu-Hwam Oh
Mater. Sci. & Eng. A. Vol. 387-389 (2004) p. 60-63.
37. “Texture evolution and plastic strain ratio in 5083 aluminum alloys processed by cold forging”
Jun-Hyun Han, Kwang-Koo Jee, Kyu Hwan Oh
J. of Korea Inst. of Met. & Mater. Vol.42, No.6 (2004) p. 530-535.
36. “Effect of Post-Annealing on Microstructure and Magnetoresistance of Sputtered Semimetal Bi Thin Film”,
M.H. Jeun, J.Y. Chang, S.H. Han, J. H. Han, W.Y. Lee
J. of Korea Inst. of Met. & Mater. Vol.42, No.7 (2004) p. 611-615.
35. “Effect of Initial Texture on Texture Evolution in 1050 Al Alloys under Simple Shear”
Jun-Hyun Han, Kyu Hwan Oh, Jae-Chul Lee
Metallurgical and Materials Transactions A, Vol. 34A (2003) p. 1675-1681.
34. “Orientation rotation behavior during in-situ tensile deformation of polycrystalline aluminum alloys”
Jun-Hyun Han, Kwang-Koo Jee, Kyu Hwan Oh
Int. J. of Mechanical Science, Vol.45 (2003) p. 1613-1623.
33. “Effect of deformation histories on texture evolution during equal- and dissimilar channel angular pressing”
Jin-Yoo Suh, Jun-Hyun Han, Kyu-Hwan Oh, Jae-Chul Lee
Scripta Mater. Vol. 49 (2003) p. 185-190.
32. “Effect of precipitates on microstructural evolution of 7050 Al alloy sheet during equal channel angular rolling”
C.Y. Nam, J.H. Han, Y.H. Chung, M.C. Shin
Materials Science & Eng. A, Vol. A347 (2003) p. 253-257.
31. “The Effect of Interlayer Thickness on Shear Deformation Behavior of AA5083 Aluminum Alloy/SS41 Steel Plates Manufactured by Explosive Welding”
Jun Hyun Han, Jae Pyoung Ahn, Myung Chul Shin
J. of Materials Science Vol. 38 (2003) p. 13-18.
30. “In Situ Deformation Behavior Study during Uniaxial Tension of Aluminum Alloys Using a High Resolution EBSD”
Jun-Hyun Han, Kyu Hwan Oh, Young Hoon Chung
Key Engineering Materials Vols. 233-236 (2003) p. 835-840
Yongbeom Lee, Sangjin Park, Jun Hyun Han
Composites Research, Vol. 28, No. 5 (2015) p. 254-259.
97. “Etchless Cu Circuit Fabrication Using Wettability Difference and Electroless Plating”
Sang-Jin Park, Tae-Jun Ko, Juil Yoon, Myoung-Woon Moon, Jun Hyun Han
Korean Journal of Materials Research, Vol. 25, No. 11 (2015) p. 622-629.
96. “Fabrication of AlN/Cu Composites Using Electroless Plating and Evaluation of Thermal Properties as AlN Particle Size”
Sung Chul Cho, Se-Hyun Ko, Hye Sung Kim, Jae-Pyung Ahn, Jun Hyun Han
Korean Journal of Metals & Materials, Vol. 53, No. 12 (2015) p. 911-918.
95. “Texture and magnetic properties of Fe thin films fabricated by field-sputtering vs field-annealing”
Sang Jin Park, Chin-Hung Liu, Hae Sung Kim, No Jin Park, Sungho Jin, Jun Hyun Han
Thin Solid Films, Vol. 594 (2015) p. 178-183.
94. “Microstructure and Properties of Silicon-Incorporated DLC Film Fabricated Using HMDS Gas and RF-PECVD Process”
Byung Ju Song, Woo Jin Song, Jun Hyun Han, Ka Ram Kim, Su Jong Yoon, Tae Gyu Kim, Jin kon Kim, Hyun Cho, Gyeung-Ho Kim, Dae Youn Hwang, and Hye Sung Kim
J. Nanoscience & Nanotechnology, Vol.14 (2014) p.9124-9130
93. “Corrosion Behavior of Magnesium Powder Fabricated by High-Energy Ball Milling and Spark Plasma Sintering”
Ka Ram Kim, Jin Woo Ahn, Gyeung-Ho Kim, Jun Hyun Han, Kwon Koo Cho, Jae-Seung Roh, Woo Jin Kim, and Hye Sung Kim
Metals and Materials International, Vol. 20 (2014) p.1095-1101
92. “Dynamic recrystallization in high-purity aluminum single crystal under frictionless deformation mode at room temperature”
Yong Seok Choi, Kyung Il Kim and Kyu Hwan Oh, Heung Nam Han, Suk Hoon Kang, Jinsung Jang, Jun Hyun Han
J. of Materials Research, Vol.28 No.20 (2013) p.2829-2834.
91. “Thermoelastic strain in polycrystalline Fe-Pd shape memory alloy thin film”
Jun Hyun Han, Juil Yoon, Kwang Koo Jee, Joost J. Vlassak
Thin Solid Films. Vol.546 (2013) p.196-199.
90. “Effects of Cu interlayer on the wettability of aluminum on carbon”
Young Jin Ko, Juil Yoon, Joonho Lee, Jun Hyun Han
J. of Alloys & Compounds, Vol.574 (2013) p.526-531.
89. “Effect of change in coil orientation for SMA spring”
K.E. Kim, J.H. Han, Y.M. Sung, K.K. Jee, W.Y. Jang
J. of Alloys & Compounds. Vol.577S (2013) p.S741-S744.
88. “Tb0.3Dy0.7Fe1.9/PbZr0.52Ti0.48O3 micro-bridge on SiNx thin film for low frequency magnetic sensing applications”
Dong Gun Lee, Jun Hyun Han, Junwoo Lee, Wook Choi, Yong Kyung Yoo, Jinseok Kim, Kyo Seon Hwang, Tae Song Kim, Dong Won Chun, Yu-Chan Kim, Kyu Hyung Lee, and Jeong Hoon Lee
Japanese Journal of Applied Physics, Vol.52 (2013) p.10MC10-1~ 10MC10-4.
87. “Improvement of actuating properties of a SMA coil spring by change in coil orientation”
K. K. Jee, J. H. Han, W. Y. Jang
Materials Science Forum, Vols. 738-739 (2013) p.589-594
86. “Ultra-sensitive magnetoelectric microcantilever at a low frequency”
Dong Gun Lee, Sung Man Kim, Yong Kyung Yoo, Jun Hyun Han, Dong Won Chun, Yu-Chan Kim, Jinseok Kim, Kyo Seon Hwang, Tae Song Kim, Won Woo Jo, Hyungsuk Kim, Seung-Ho Song and Jeong Hoon Lee
Applied Physics Letters, Vol. 101 (2012) p.182902-1∼4.
85. “Effects of CNF dispersion on mechanical properties of CNF reinforced A7xxx nanocomposites”
Jun-Young Lim, Se-Il Oh, Yu-Chan Kim, Kwang-Koo Jee, Yun-Mo Sung, Jun Hyun Han
Mater. Sci. & Eng. A, Vol.556 (2012) p.337-342
84. “Fabrication of carbon nanofiber reinforced aluminum alloy nanocomposites by a liquid process”
Se-Il Oh, Jun-Young Lim, Yu-Chan Kim, Juil Yoon, Gyeung-Ho Kim, Joonho Lee, Yun-Mo Sung, Jun-Hyun Han
J. of Alloys & Compounds, Vol.542 (2012) p.111-117
83. “Magnetic anisotropy and morphology of Fe epitaxial layers grown on MgO/InAs heterostructures”
Kyung-Ho Kim, Hyung-jun Kim, Jae-Pyung Ahn, Jun-Hyun Han, Jun Woo Choi, and Joonyeon Chang
J. of Nanoscience and Nanotechnology (JNN), Vol.12, No.2 (2012) p.1573-1576
82. “Microstructural Changes of Epitaxial Fe/MgO layers grown on InAs(001) substrates”
Kyung-Ho Kim, Hyung-jun Kim, Jae-Pyoung Ahn, Jun Woo Choi, Jun-Hyun Han, Rizcy Tamarany, Seung-Cheol Lee, Joonyeon Chang, Young Keun Kim
Crystal Growth & Design, Vol.11 (2011) p.2889-2896
81. “Effects of external magnetic field on magnetic properties of sputtered magnetic thin film”
Hyun Tae Ahn, Sang Ho Lim, Kwang Koo Jee, Jun Hyun Han
J. of Korea Inst. of Met. & Mater. Vol. 49, No. 6 (2011) p.501-513.
80. “Asymmetric rolling of twin-roll cast Al alloy sheet: Mechanical properties and formability”,
Boo-Hyeon Cheon, Jun-Hyun Han, Hyoung-Wook Kim, Jae-Chul Lee
J. of Korea Inst. of Met. & Mater. Vol. 49, No. 3 (2011) p.243-249.
79. “Effects of aging on microstructure and strengthening in 7050 Al alloy sheet processed by equal channel angular rolling (ECAR)”
Jun-Hyun Han
Materials Transactions, (2010) Vol.51, No.11 (2010) p.2109-2112
78. “New SMA Actuator with High Energy Efficiency and Quick Response”
Kwang Koo Jee, Jun Hyun Han, J.M. Park, Woo Yang Jang
Materials Science Forum, Vol.654-656 (2010) p.2111-2113.
77. “Shape Memory Effect in Fe-Pd Magnetic Shape Memory Alloy Thin Films”
Jun Hyun Han, Hyun Tae Ahn, Tae Hyun Kim, Kwang Koo Jee
Materials Science Forum, Vol.654-656 (2010) p.2107-2110.
76. “Characterization on Titanium Surfaces and its effect of Photocatalytic Bactericidal Activity”
H. C. JOO, Y. J. Lim, M. J. Kim, H. B. Kwon, J. H. Han
Applied Surface Science, Vol.257 (2010) p.741-746.
75. “High-Frequency Magnetic Properties of Soft Magnetic Cores Based on Nanocrystalline Alloy Powder Prepared by Thermal Oxidation”
T. H. Kim, K. K. Jee, D. J. Byun, Yoon B. Kim, J. H. Han
J. of Magnetism and Magnetic Materials (JMMM), Vol. 322 (2010) p.2423-2427.
74. “A study on powder mixing for high fracture toughness and wear resistance of WC-Co-Cr coatings sprayed by HVOF”
C. W. Lee, J. H. Han, J. Yoon, M. C. Shin, S. I. Kwun
Surface & Coatings Technology, Vol. 204 (2010) p. 2223-2229.
73. “Wrinkle-based measurement of elastic modulus of Pt nano-scale thin film deposited on polymeric substrate: verification and uncertainty analysis”
Hyun-Ju Choi, Jae-Hyun Kim, Hee-Jung Lee, Sun-Ah Song, Hak-JooLee, Jun-Hyun Han, Myung-Woon Moon
Experimental Mechanics, Vol. 50, No.5 (2010) p.635-641.
72. “Microstructure and mechanical properties of twin-rolled strip-cast Al-5.5Mg-0.02Ti ally sheet”
Boo-Hyoen Cheon, Jun-Hyun Han, Hyoung-Wook Kim, Jae-Chul Lee
J. of Korea Inst. of Met. & Mater. Vol. 48, No. 5 (2010) p.387-393.
71. “A Measurement of Elastic Moduli for Tungsten Films on Polymer Substrate Using Wrinkling Analysis”,
Myoung-Woon Moon, Jun Hyun Han
Applied Surface Science, Vol. 256 (2009) p. 593-596.
70. “Nanoscale ripples on polymers created by focused ion beam”
Myoung-Woon Moon, Jun Hyun Han, Ashkan Vaziri, Eun Kyu Her, Kyu Hwan Oh, Kwang-Ryeol Lee, and John W. Hutchinson
Nanotechnology. Vol.20 (2009) p.115301.
69. “Effects of die geometry on variation of the deformation rate in equal channel angular pressing”
Jun-Hyun Han, Hyung-Joon Chang, Kwang-Koo, Kyu Hwan Oh
Metals and Materials International, Vol.15 (2009) p.439-445.
68. “Fe-Based Nano-Structured Powder Reinforced Zr-Based Bulk Metallic Glass Composites by Powder Consolidation”
Seung Mok Cho, Jun Hyun Han, Jin Kyu Lee, Yu Chan Kim
Kor. J. Mater. Res., Vol. 19, No.9 (2009) p.504-509.
67. “Effects of powder mixing on the mechanical properties of thermally sprayed WC-Co-Cr coating layers”
Chang Woo Lee, Jun Hyun Han, Myung Chul Shin, S. I. Kwun
J. of Korea Inst. of Met. & Mater. Vol. 47 (2009) p. 290-296.
66. “Effects of surfactant and preplate process on electroless copper plating on carbon nano-fiber”
Jun Hyun Han, Hyun Kwang Seok, Sang Soo Lee, Kwang Koo Jee
J. of Korean Powder Metallurgy Institute, Vol. 16, No.2 (2009) p. 131-137.
65. “New method for improving properties of SMA coil springs”,
K. K. Jee, J. H. Han, Y. B. Kim, D. H. Lee, W. Y. Jang
European Physical Journal Special Topics, Vol. 158, (2008) p. 261-266.
64. “High-throughput analysis of thin-film stresses using arrays of micromachined cantilever beams”
Hyun-Jong Kim, Jun-Hyun Han, Roy Kaiser, Kyu Hwan Oh, Joost J. Vlassak
Review of Scientific Instruments, Vol.79 (2008) p.045112-1~045112-7.
63. “Evaluation of formability and planar anisotropy based on textures in aluminum alloys processed by a shear deforming process”
Jun-Hyun Han, Jin-Yoo Suh, Kwang-Koo Jee, Jae-Chul Lee
Mater. Sci. & Eng. A, Vol.477 (2008) p.107-120.
62. “Soft magnetic properties of patterned Co-based amorphous wires with various dimensions”,
Chang Bean Park, Do Hun Kim, Dong Won Chun, Jun Hyun Han, Heon Jin Choi, Won Young Jeung
Physica Status Solidi C, Vol.4, No.12 (2007), p. 4581-4584
61. “Giant magnetoimpedence effects in micro-patterned Co52Fe32B11Si5 amorphous ribbons”
Sun Hee Park, Dong Won Chun, Jun Hyun Han, Young-Ho Kim and Won Young Jeung
Physica Status Solidi A, Vol.204, No.12 (2007) p.4071-4074
60. “Effects of external magnetic field on magnetic properties and surface morphology of electrodeposited CoFeNi alloys”
Hyun Kyung Kim, Dong Won Chun, Jun Hyun Han, Kwang Bum Kim and Won Young Jeung
Physica Status Solidi A, Vol. 204, No.12 (2007), p. 4104-4107
59. “Formation of nitride film on amorphous ribbon using chemical vapor deposition”,
Jun-Hyun Han, Tae-Hoon Kim Jin-Kook Yoon, Kwang-Koo Jee, Kwang-Yoon Kim
Mater. Sci. & Eng. A, Vol. 449-451 (2007) p.741-746
58. “Adhesion Properties of Copper/Polyimide Film Modified by Reactive Ion Etching (RIE)”,
W. J. Lee, Yoon B. Kim, W.Y. Lee, S. H. Han, J. H. Han, K. K. Jee
Solid State Phenomena Vol.124-126, (2007) p.1593-1596
57. “Suggestion of Pipe Coupling Method for Maximum and Uniform Joining Stress”
K. K. Jee, J. H. Han, W. S. Jung and W. Y. Jang
Materials Transactions Vol.47, No.3, (2006) p.750-752
56. “A method of pipe joining using shape memory alloys”
K. K. Jee, J. H. Han, W. Y. Jang
Mater. Sci. & Eng. A, Vol. 438-440 (2006) p.1110-1112
55. “Effect of grain size on amount of deformation-induced e-martensite and shape memory effect in Fe-Mn alloy”
K. K. Jee, J. H. Han, Y. B. Kim, W. Y. Jang
International Journal of Applied Electromagnetics and Mechanics Vol. 23, (2006) p.59-64
54. “Effect of electromagnetic stirring on orientation distribution function of primary solid phase of Al-Cu alloy”
Dock-Young Lee, Jun-Hyun Han, Suk-Won Kang, Jung-Hwa Mun, Ki-Bae Kim
Materials Science Forum Vols. 510-511 (2006) pp. 526-529.
53. “Microstructure and magnetoresistance of sputtered Bismuth thin Films upon annealing”
Joonyeon Chang, Jun Hyun Han, H. J. Kim, M. H. Jeon, W. Y. Lee
Journal of Applied Physics Vol. 98, No. 2, (2005) p. 023906
52. “Low-temperature cyclic oxidation behavior of MoSi2/Si3N4 nanocomposite coating formed on Mo substrate at 773K”,
Jin-Kook Yoon, Kyung-Hwan Lee, Jun-Hyun Han, Gyeung-Ho Kim, Jung-Mann Doh, Kyung-Tae Hong
Surface Coatings & Technology Vol.200, No.7 (2005) p.2537-2546
51. Jun-Hyun Han, Jin-Kook Yoon, Jong-Woo Park, Kyu Hwan Oh, Jae-Chul Lee
“A Comparative Study of Two Shear Deforming Processes in Texture Evolution” Materials Transactions Vol.46, No.5 (2005) p.1064-1069
50. “Microstructure and oxidation property of NbSi2/Si3N4 nanocomposite coating formed on Nb substrate by nitridation process followed by pack siliconizing process”
Jin-Kook Yoon, Kyung-Hwan Lee, Jun-Hyun Han, In-Jin Son, Jung-Mann Doh, and Gyeung-Ho Kim
Intermetallics, Vol.13, No.11 (2005) p.1146-1156
49. “Microstructure of NbSi2/SiC nanocomposite coating formed on Nb substrate”
Keun-Hyung Son, Jin-Kook Yoon, Jun-Hyun Han, Gyeung-Ho Kim, Jung-Mann Doh, Seong-Rae Lee
J. of Alloys and Compounds, Vol. 395 (2005) p. 185-191.
48. “Microstructure of MoSi2-base nanocomposite coatings formed on Mo substrates by chemical vapor deposition”
Jin-Kook Yoon, Keun-Hyung Son, Jun-Hyun Han, Gyeung-Ho Kim, Jung-Mann Doh, Kyung-Tae Hong
Zeitschrift fur Metallkunde, Vol. 96, No. 3 (2005) p. 281-290.
47. “Controlling the textures of the Al alloy sheet via dissimilar channel angular pressing”
Jun Hyun Han, M. Y. Huh, Jin Yoo Suh, and Jae Chul Lee
Mater. Sci. & Eng. A. Vol 394 (2005) p. 60-65
46. “Effect of Heat Treatment Temperature on Amount of Stress-Induced e Martensite in an Fe-Mn Based Alloy”
K.K. Jee, J. H. Han, W.Y. Jang
J. of the Korean Society for Heat Treatment, Vol. 17, No. 6 (2004) p.342-345.
45. “Effects of the initial textures and the deformation history on the texture evolution in the Al alloy during the shear deforming process”
Jun-Hyun Han, Jin-Yoo Suh, Kyu Hwan Oh, Jae-Chul Lee
Acta Materialia, Vol.52, No.16 (2004) p.4907-4918.
44. “Orientation Rotation Behaviors in Aluminum Alloys during Dissimilar Channel Angular Pressing”
Jun-Hyun Han, Jin-Yoo Suh, Kyu Hwan Oh, Jae-Chul Lee
Materials Transactions, Vol.45, No.1 (2004) p.125-130.
43. “In-situ Orientation Rotation Behavior Study during Tensile Deformation of Aluminum Single Crystal and Polycrystal”
Jun-Hyun Han, Dong-Ik Kim, Kwang-Koo Jee, Kyu Hwan Oh
Materials Science Forum, Vol. 449-452, (2004) p.593-596
42. “Measurement of volume fraction of ε martensite in Fe-Mn based alloy”
K. K. Jee, J. H. Han and W. Y. Jang
Mater. Sci. & Eng. A, Vol. A378 (2004) p. 319-322
41. “Characteristic of textures evolution induced by equal channel angular pressing in 6061 aluminum sheets”
Qin Jining, Jun-Hyun Han, Zhang Guoding, Jae-Chul Lee
Scripta Materialia, Vol. 51 (2004) p. 185-189
40. “Low-Temperature Cyclic Oxidation Behavior of MoSi2/SiC Nanocomposite Coating Formed on Mo Substrate”
Jin-Kook Yoon, Kyung-Hwan Lee, Jun-Hyun Han, Gyeung-Ho Kim, Jung-Mann Doh, Kyung-Tae Hong
Materials Transactions, Vol.45 No.7 (2004) p. 2435-2442
39. “Effect of Accumulative Strain on the Texture Evolution in 1050 Al alloys Processed by Continuous Confined Strip Shearing”
Jun-Hyun Han, Kyu-Hwan Oh, Jae-Chul Lee
Mater. Sci. & Eng. A, Vol. 387-389 (2004) p. 240-243.
38. “Evolution of crystallographic orientations in aluminum single crystal during tensile deformation”
Jun-Hyun Han, Dong-Ik Kim, Kwang-Koo Jee, Kyu-Hwam Oh
Mater. Sci. & Eng. A. Vol. 387-389 (2004) p. 60-63.
37. “Texture evolution and plastic strain ratio in 5083 aluminum alloys processed by cold forging”
Jun-Hyun Han, Kwang-Koo Jee, Kyu Hwan Oh
J. of Korea Inst. of Met. & Mater. Vol.42, No.6 (2004) p. 530-535.
36. “Effect of Post-Annealing on Microstructure and Magnetoresistance of Sputtered Semimetal Bi Thin Film”,
M.H. Jeun, J.Y. Chang, S.H. Han, J. H. Han, W.Y. Lee
J. of Korea Inst. of Met. & Mater. Vol.42, No.7 (2004) p. 611-615.
35. “Effect of Initial Texture on Texture Evolution in 1050 Al Alloys under Simple Shear”
Jun-Hyun Han, Kyu Hwan Oh, Jae-Chul Lee
Metallurgical and Materials Transactions A, Vol. 34A (2003) p. 1675-1681.
34. “Orientation rotation behavior during in-situ tensile deformation of polycrystalline aluminum alloys”
Jun-Hyun Han, Kwang-Koo Jee, Kyu Hwan Oh
Int. J. of Mechanical Science, Vol.45 (2003) p. 1613-1623.
33. “Effect of deformation histories on texture evolution during equal- and dissimilar channel angular pressing”
Jin-Yoo Suh, Jun-Hyun Han, Kyu-Hwan Oh, Jae-Chul Lee
Scripta Mater. Vol. 49 (2003) p. 185-190.
32. “Effect of precipitates on microstructural evolution of 7050 Al alloy sheet during equal channel angular rolling”
C.Y. Nam, J.H. Han, Y.H. Chung, M.C. Shin
Materials Science & Eng. A, Vol. A347 (2003) p. 253-257.
31. “The Effect of Interlayer Thickness on Shear Deformation Behavior of AA5083 Aluminum Alloy/SS41 Steel Plates Manufactured by Explosive Welding”
Jun Hyun Han, Jae Pyoung Ahn, Myung Chul Shin
J. of Materials Science Vol. 38 (2003) p. 13-18.
30. “In Situ Deformation Behavior Study during Uniaxial Tension of Aluminum Alloys Using a High Resolution EBSD”
Jun-Hyun Han, Kyu Hwan Oh, Young Hoon Chung
Key Engineering Materials Vols. 233-236 (2003) p. 835-840
29. “Measurement of Volume Fraction of e Martensite using Specific Volume Difference in Fe-Mn Based Alloys”
K.K. Jee, J. H. Han, W.Y. Jang
J. of the Korean Society for Heat Treatment, Vol. 16, No. 4 (2003) p.211-215
28. “Shear Deformation Behavior of AA5083/AA1050/SS41 Plates Manufactured by Explosive Welding”
Jun Hyun Han, Jae Pyung Ahn, Kyu Hwan Oh, Myung Chul Shin
J. of Korea Inst. of Met. & Mater. Vol. 41, No.4, (2003) p.244-249
27. “Texture Evolutions of 5052 Aluminum Alloy Sheets Processed by Dissimilar Channel Angular Pressing”
Jun Hyun Han, Kyu Hwan Oh, Kwang Koo Jee, Young Hoon Chung, Myung Chul Shin
Materials Science Forum Vol. 408-412 (2002) p. 679-684
26. “Orientation Correction Method of Distorted Samples During In-situ Deformations Using High Resolution EBSD”
Jun Hyun Han, Suk Min Baeck, Kyu Hwan Oh, Young Hoon Chung
Materials Science Forum Vol. 408-412 (2002) p. 203-208
25. “In Situ Deformation Behavior of Retained Austenite in TRIP Steel”,
K.K. Park, S.T. Oh, S.M. Baeck, D.-I. Kim, J.H. Han, H.N. Han, S.-H. Park, C.G. Lee, S.-J. Kim, K.H. Oh
Materials Science Forum Vol. 408-412 (2002) p. 571-576.
24. “A Study of screw loosening with various implant fixture and abutment connection system”,
Tae-In Kim, Tae-Sik Song, Ki-Sung Kim, Jun-Hyun Han
J. of the Korean Academy of Implant Dentistry, Vol.21, No.1, (2002) p.21-33
23. “Korean Implant Development and Clinical Application-Protect447 Implant R&D”
T.I. Kim, J.H. Han, K.H. Lee
Reality of Dental Implant, Vol.22, No.6, (2002) p.734-739
22. “Effect of the Initial Texture on the Texture Evolution in 1050 Al Alloys fabricated by Continuous Confined Strip Shearing”
Jun Hyun Han, Kyu Hwan Oh, Myung Chul Shin, Jae Chul Lee
J. of Korea Inst. of Met. & Mater. Vol. 40, No.11, (2002) p. 1215-1222
21. “Texture evolution of the strip cast 1050 Al alloy processed by continuous confined strip shearing and formability evaluation”
Jun-Hyun Han, Hyun-Kwang Seok, Young-Hoon Chung, Myung-Chul Shin, Jae-Chul Lee
Materials Science & Eng. Vol. A323 (2002) p. 342-347
20. “Fabrication of AA6061/Al2O3 composites from element and alloy powders”,
K. B. Lee, H. S. Sim, Y. S. Kim, J. H. Han, H. Kwon
J. of Materials Science Vol.37 (2002) p. 1845-1854
19. “Structural Evolution of a Strip-Cast Al Alloy Sheet Processed by Continuous Equal-Channel Angular Pressing”
Jae-Chul Lee, Hyun-Kwang Seok, Jin-Yoo Suh, Jun-Hyun Han, Young-Hoon Chung
Metallurgical and Materials Transactions A Vol.33A (2002) p. 665-673
18. “Controlling the textures of the metal strips via the continuous confined strip shearing”
Jae-Chul Lee, Hyun-Kwang Seok, Jun-Hyun Han, Young Hoon Chung
Materials Research Bulletin Vol.36 (2001) p. 997-1004
17. “A Study of Osseointegration on Protect-447 dental implant in rabbit bone”
Taein Kim, Jae-Il Lee, Jun-Hyun Han, Hyung Jin Kim
J. of the Korean Academy of Implant Dentistry, Vol.20, No.1, (2001) p. 39-47
16. “Effect of Continuous Confined Strip Shearing on Texture of Strip Cast 1050 Al Alloy Sheet”
Jun Hyun Han, Kyu Hwan Oh, Hyun Kwand Seok, Young Hoon Chung
J. of Korea Inst. of Met. & Mater. Vol. 39, No.11, (2001) p.1330-1336
15. “Grain Structure Analysis in Rolled 1050 Al Alloy Sheets Using EBSD”
J. H. Han, M. C. Shin
J. of Analytical Science & Technology, Vol.14, No.1, (2001) p.50-58
14. “Effect of Grain Shape and Texture on the Earing in Al-Li Alloy”
Y. H. Chung, K. K. Cho, J. H. Han, M. C. Shin
Scripta mater Vol. 43 (2000) p. 759-764
13. “The Effect of Grain Structure on the Current-Density Exponent in the Black Equation for Al-Based Inetrconnects”
J. H. Han, M. C. Shin, and S. H. Kang
J. of the Korean Physical Society Vol.35 (1999) p. S256-S259
12. “Effects of Precipitates Distribution on Electromigration in Al-Cu Thin-Film Interconnects”
J. H. Han, M. C. Shin, S. H. Kang, J. W. Morris, Jr
Applied Physics Letters, Vol.73, No.6, (1998) p. 762-764
11. “A Histomorphometric Study of Bone Apposition to Newly Developed Ti Based Alloys in Rabbit Bone”
Taein Kim, Jun Hyun Han, Kyu Hwan Lee, Boo Byung Choi, Myung Chul Shin
Biomaterials Research Vol.2 No.4 (1998) p. 145-152
10. “Development of Ti Metal Implant System and Manufacturing Technique in Korea (2)”
T. I. Kim, J. H. Han, I. S. Lee, W. S. Heu, K.H. Lee
The Journal of the Korean Dental Association, Vol.36, No.1, (1998) p.17-27
9. “New titanium alloys for biomaterials: A study of mechanical and corrosion properties and cytotoxicity”,
Taein Kim, Jun-Hyun Han, In-Seok Lee, Kyu-Hwan Lee, Boo-Byung Choi, Myung Chul Shin
Bio-Medical Materials and Engineering Vol.7, No.4 (1997) p. 253-263
8. “Development of Ti Metal Implant System and Manufacturing Technique in Korea”
T.I. Kim, J.H. Han, I.S. Lee, W.S. Heu, K.H. Lee
J. of the Korean Academy of Implant Dentistry, Vol.16, No.1, (1997) p.1-26
7. “Development of Ti Metal Implant System and Manufacturing Technique in Korea (1)”
T.I. Kim, J.H. Han, K.H. Lee
The Journal of the Korean Dental Association, Vol.35, No.12, (1997) p.927-933
6. “Effects of Post-Pattern Annealing on Electromigration in Al-2Cu Interconnects”
J. H. Han and M. C. Shin
J. of Korea Inst. of Met. & Mater. Vol.35, No.11 (1997) p. 1555-1560
5. “A Study on Cytotoxicity of the New Titanium Alloys for Dental Implant Material”
T. I. Kim, J. H. Han, I. S. Lee, K. H. Lee, M. C. Shin, B. B. Choi
The Journal of Korean Academy of Prosthodontics, Vol.34, No.4, (1996) p. 675-686
4. “Corrosion Characteristics of Titanium Alloys for Medical Implant”
J. H. Han, K. H. Lee, M. C. Shin
J. of Analytical Science & Technology, Vol.9, No.2, (1996) p. 192-197
3. “A Study on Mechanical Properties and Cytotoxicity of the New Titanium Alloys for Implant Material”
T. I. Kim, J. H. Han, I. S. Lee, K. H. Lee, M. C. Shin, B. B. Choi
J. of the Korean Academy of Implant Dentistry, Vol.15, No.1, (1996) p. 1-18
2. “Stress Localization and Stress Recovery in a Shape Memory Alloy”
K.K. Jee, J.H. Han, X.J. Mi, M.C. Shin
J. of Korea Inst. of Met. & Mater. Vol.34, No.1 (1996) p. 47-51
1. “Effect of Precess Variables on Mechanical Properties of AC8A/SiCp Composites by Melt-Stirring Method"
J. H. Han, Y. H. Hong, J. H. Hong
J. of Korea Inst. of Met. & Mater. Vol.32, No.6 (1994) p. 734-741